Bogged While Goin 50mph And Now Wont Start
#13
no i havent been getting on the car since steve kan was tuning it about a month ago... i was in 5th gear an all of a sudden it started bogging
here is the weird thing that happened today though..
i tried to start the car to move it... and it felt like it wanted to die, so i decided to clear the engine by disconnecting the fuel pump. i started the car and it idled for 5 mins before finally sputtering to a stop.
here is the weird thing that happened today though..
i tried to start the car to move it... and it felt like it wanted to die, so i decided to clear the engine by disconnecting the fuel pump. i started the car and it idled for 5 mins before finally sputtering to a stop.
#15
I can't remember what map sensor your running so...
Stock = Normal
Apexi' 3 bar = Option 1
GM 3 Bar = the one that says scale 41800, and offset to 0, if you don't see one that says this and you have the GM 3 bar then just modify option 2 or 3 to those setting and you should be golden...
Stock = Normal
Apexi' 3 bar = Option 1
GM 3 Bar = the one that says scale 41800, and offset to 0, if you don't see one that says this and you have the GM 3 bar then just modify option 2 or 3 to those setting and you should be golden...
#16
thanks chris.. i looked at the map that you setup for me, and thats exactly what it showed on option 3
i guess there is no actual setting on the datalogit software, here is the page on the program
i guess there is no actual setting on the datalogit software, here is the page on the program
#19
that pic is of the default.dat file... Ie. the stock power FC map... throw up a pic of the actual map on your computer...
If your option 3 is set to scale 41800, and offset 0 and your running a GM 3 bar then the map sensor is definitly bad. Probably had some crap blown up in to it that is causing it to read incorectly...
This is about the cheapest replacment you will find... $53.88
http://store.summitracing.com/partdetail.a...52&autoview=sku
If your option 3 is set to scale 41800, and offset 0 and your running a GM 3 bar then the map sensor is definitly bad. Probably had some crap blown up in to it that is causing it to read incorectly...
This is about the cheapest replacment you will find... $53.88
http://store.summitracing.com/partdetail.a...52&autoview=sku
#20
[quote name='phinsup' date='Aug 6 2005, 12:50 PM']Did steve actually tune it? I thought he had to back off because you had shananigans enabled.
[/quote]
fuel pressure was dropping under boost
[snapback]745765[/snapback]
[/quote]
fuel pressure was dropping under boost