Apexi Avcr With Non Sequential Turbos?
02-12-2005, 11:09 AM
#1
Senior Member
Thread Starter
Join Date: Nov 2001
Posts: 217
Tried doing a search but came up negative. Anybody running their FULLY converted non sequential turbos with an apexi avcr boost controller? If so, what were your impressions and what must me done/hooked up differently to the turbos?? I have it hooked up to my stock sequential twins right now. Thanks a bunch.
02-12-2005, 07:18 PM
#2
Senior Member
Join Date: May 2002
Location: Okinawa, Japan
Posts: 4,928
Hooks up just like a single turbo would, except instead of the NC port it will be connected to the NO port on the solenoid (if memory serves me correct). From the solenoid then you just connect to the wastegate nipple. Be sure to cap off the other side.
02-12-2005, 07:28 PM
#3
Senior Member
Thread Starter
Join Date: Nov 2001
Posts: 217
Originally Posted by jspecracer7' date='Feb 13 2005, 01:17 AM
Hooks up just like a single turbo would, except instead of the NC port it will be connected to the NO port on the solenoid (if memory serves me correct). From the solenoid then you just connect to the wastegate nipple. Be sure to cap off the other side.
thanks
Thread
Thread Starter
Forum
Replies
Last Post
RX7 RAGE
ECU Map Downloads
2
09-02-2007 11:31 AM
astrochild7
RX-7 & RX-8 Parts For Sale & Wanted
2
10-01-2006 10:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)