3 Rotor Convertion Special !!!!
#1
Ok, listen up guys ,, for this month and the next one only. I have decided to put a special on 3 rotor convertion. The 3 rotor convertion will cost $35,000. This will include the following.
1. 3 Rotor engine
2. Port Polished Engine
3. 3mm Rotors and apex seal
4. Dual Ball Bearing Turbo (single)
5. Front Mount Intercooler
6. Injectors
7. 2 Bosh fuel pump
8. Stainless Steal Turbo Manifold
9. Billet Intake Manifold
10. Billet Oil Pan
11. Microtech ECU
12. Bosh Coils
13. Billet Fuel Rails
14. Fuel Regulator
15. HKS Wastegate
16. BLow Off Valve
17. Intercooler Piping Alum ,(polished)
18. Down Pipe
20. Cat Back Muffer System
21. Everything Install & dyno tune
22. Clutch / Flywheel
23. Boost / Air fuel Gauge
24. Dual Stage Boost Control
***If when we take the car to the dyno the car those not make 600HP to the wheel @ low boost on Pump Gas. YOU DONT PAID*****
****The Motor also make 850Hp @ high Boost , with RACE GAs
1. 3 Rotor engine
2. Port Polished Engine
3. 3mm Rotors and apex seal
4. Dual Ball Bearing Turbo (single)
5. Front Mount Intercooler
6. Injectors
7. 2 Bosh fuel pump
8. Stainless Steal Turbo Manifold
9. Billet Intake Manifold
10. Billet Oil Pan
11. Microtech ECU
12. Bosh Coils
13. Billet Fuel Rails
14. Fuel Regulator
15. HKS Wastegate
16. BLow Off Valve
17. Intercooler Piping Alum ,(polished)
18. Down Pipe
20. Cat Back Muffer System
21. Everything Install & dyno tune
22. Clutch / Flywheel
23. Boost / Air fuel Gauge
24. Dual Stage Boost Control
***If when we take the car to the dyno the car those not make 600HP to the wheel @ low boost on Pump Gas. YOU DONT PAID*****
****The Motor also make 850Hp @ high Boost , with RACE GAs
#8
I think he was reffering to times, not HP numbers, lets see, SoulAssassin was running 600 hp on a series5 Rx-7 at what, 15 lbs? 17? that was good for about 10.44 or so if I remember correctly, and that wasn't even in a 3rd gen.
#10
Yeah I didnt mention HPs...
Would you like me to Fax you a list of Cars FD/FCs that make over
600rwhp, 12psi and on pump gas? I can do it, make sure your machine
is full of paper.
I wasnt trying to be a smart as man, so whats the deal?
Also yes I do know of one or 2, 2 rotors that makes 800hp, I have seen a 3 rotor
with over 1000hp (street driven).
More power to you man, I was just adding my piece. If you dont want any
criticism, maybe you shouldnt post here. This is a place for people to talk
and Ideas, not one way conversions.....
Seriously, would you like me to post pics and stats?
Jason
www.jt-imports.com
Would you like me to Fax you a list of Cars FD/FCs that make over
600rwhp, 12psi and on pump gas? I can do it, make sure your machine
is full of paper.
I wasnt trying to be a smart as man, so whats the deal?
Also yes I do know of one or 2, 2 rotors that makes 800hp, I have seen a 3 rotor
with over 1000hp (street driven).
More power to you man, I was just adding my piece. If you dont want any
criticism, maybe you shouldnt post here. This is a place for people to talk
and Ideas, not one way conversions.....
Seriously, would you like me to post pics and stats?
Jason
www.jt-imports.com