1600 Cc Inj
06-14-2003, 11:55 AM
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: PA Pittsburgh
Posts: 575
Well i have to T04E and i'm looking at runnin more boost i also have a PowerFC which i would like to get the datalogit for. So i wanted to either get 1300 or 1600 CC secondary injectors. I wanted to know which ones you guy's would get i'm planing on runnin no more than 17 psi of boost. Also if you coudl tell me where i can get step my step instructions on how to put em in that woudl be great. The only other thing is shoudl i upgrade my primary ones too?
Thanks for all the help.
Thanks for all the help.
06-14-2003, 03:09 PM
#3
Senior Member
Join Date: May 2002
Location: Okinawa, Japan
Posts: 4,928
Originally Posted by =RX-7 KID=-' date='Jun 15 2003, 01:55 AM
Well i have to T04E and i'm looking at runnin more boost i also have a PowerFC which i would like to get the datalogit for. So i wanted to either get 1300 or 1600 CC secondary injectors. I wanted to know which ones you guy's would get i'm planing on runnin no more than 17 psi of boost. Also if you coudl tell me where i can get step my step instructions on how to put em in that woudl be great. The only other thing is shoudl i upgrade my primary ones too?
Thanks for all the help.
Thanks for all the help.
06-14-2003, 05:16 PM
#7
Senior Member
Join Date: Nov 2002
Location: Cincinnati, Oh hi hoe!
Posts: 2,286
Originally Posted by =RX-7 KID=-' date='Jun 14 2003, 05:47 PM
I have a FMIC so there's no hot air goin into my engine.
Cool air = good.
06-14-2003, 07:02 PM
#8
Senior Member
Thread Starter
Join Date: Jan 2003
Location: PA Pittsburgh
Posts: 575
Yea i know it starts to heat air too much but the FMIC will help keep it cool even at high boost. Like a said i dont plan on running more than 15 ever anyway. But that wasent my question any way my question was what size injectors to use and how to install them.
06-14-2003, 07:06 PM
#9
Senior Member
Join Date: Nov 2001
Location: NJ
Posts: 4,981
I have the to4e. I run 1600's. plenty of fuel.
but the rail/injector combo kit from sportcar motion.
as far as the install it's not that hard, you basically take out the one rail and put in the other. But you do need a datalogit to program the PFC to run them correctly
but the rail/injector combo kit from sportcar motion.
as far as the install it's not that hard, you basically take out the one rail and put in the other. But you do need a datalogit to program the PFC to run them correctly
06-14-2003, 09:34 PM
#10
Senior Member
Thread Starter
Join Date: Jan 2003
Location: PA Pittsburgh
Posts: 575
Now i can use the datalogit with out a commander right. It just plugs into the commander port on the PFC and the other end goes into my laptop. I dont want to have to go but a commander if i dont have to. My laptop sits around my house doing nothing allday any way so i think it would be cool to just permently attach it to my car 