2nd Generation Specific 1986-1992 Discussion

It Wasn't The Breather

Old Jun 8, 2005 | 08:35 PM
  #1  
Cheers!'s Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 3,108
Default

If anyone is wondering how to change the breather out on the tranny it is simply a very tight tolerance fit.



Anyhoot... I took the old breather out... it wasn't clogged!!!! WTF? So what can cause oil to shoot out of hte front and rear main trans seals? What happens when you overfill a tranny, where would all the excess oil go? If i had overfilled it two years ago it would have only been over by a very very small amount as I just pumped oil into thr tranny until it dripped out of the fill hole....



So what do I check now?
Old Jun 9, 2005 | 06:48 AM
  #2  
sureshot's Avatar
Senior Member
 
Joined: Feb 2004
Posts: 363
From: Orange Park FL
Default

All moving part seals are normal wear parts.



You seem to be in denial that you seals may simply be worn out.



Alternatives to replacing the seals:

1) Top up the gear oil periodically.

2) Park only on level ground.

3) Park over pre-existing oil spots, so yours won't show.

4) Don't park in billionaires driveways (their cars don’t leak)

5) Carry a drip tray where ever you go.
Old Jun 9, 2005 | 07:33 AM
  #3  
Cheers!'s Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 3,108
Default

[quote name='sureshot' date='Jun 9 2005, 06:48 AM']All moving part seals are normal wear parts.



You seem to be in denial that you seals may simply be worn out.



Alternatives to replacing the seals:

1) Top up the gear oil periodically.

2) Park only on level ground.

3) Park over pre-existing oil spots, so yours won't show.

4) Don't park in billionaires driveways (their cars don’t leak)

5) Carry a drip tray where ever you go.

[snapback]723203[/snapback]

[/quote]



some how i have a hard time believing the trans oil seals wore out in 11,000 kms (~7000 miles) and two years of age. I replaced them when I changed my clutch 2 years ago. Along with the rear main engine oil seal.



The tranny does not drip transmission fluid. It was a one time event when oil sprayed out of the front and rear of the tranny.
Old Jun 9, 2005 | 09:38 AM
  #4  
RONIN FC's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 1,420
From: Boston Ma.
Default

Did the tranny possibly overheat? That could have damaged the seals.
Old Jun 9, 2005 | 11:53 AM
  #5  
ColinRX7's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 3,502
From: Canada
Default

Did you install them? Who installed them? Are they factory mazda parts or el-cheap-o seals? huh? HUH?
Old Jun 9, 2005 | 12:18 PM
  #6  
Cheers!'s Avatar
Thread Starter
Senior Member
 
Joined: Nov 2002
Posts: 3,108
Default

[quote name='ColinRX7' date='Jun 9 2005, 11:53 AM']Did you install them? Who installed them? Are they factory mazda parts or el-cheap-o seals? huh? HUH?

[snapback]723326[/snapback]

[/quote]



I installed them and I only use mazda parts on the rx7
Old Jun 9, 2005 | 02:01 PM
  #7  
nismo convert's Avatar
Senior Member
 
Joined: Apr 2004
Posts: 1,068
From: Kincardine, Ontario Canada yeah Canada bitches
Default

[quote name='Cheers!' date='Jun 9 2005, 12:18 PM']I installed them

[snapback]723350[/snapback]

[/quote]





well thats your problem right there
Old Jun 9, 2005 | 07:47 PM
  #8  
ColinRX7's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 3,502
From: Canada
Default

Are you sure you followed procedues properly?



Not to offend you, but I've screwed up parts before not putting them in properly.. People make mistakes
Old Jun 9, 2005 | 08:16 PM
  #9  
Rob x-7's Avatar
Super Moderator
 
Joined: Feb 2002
Posts: 12,288
From: Amityville, New York
Default

[quote name='ColinRX7' date='Jun 9 2005, 08:47 PM']Are you sure you followed procedues properly?



Not to offend you, but I've screwed up parts before not putting them in properly.. People make mistakes

[snapback]723490[/snapback]

[/quote]



that only show up 2 years later?
Old Jun 10, 2005 | 07:04 AM
  #10  
nismo convert's Avatar
Senior Member
 
Joined: Apr 2004
Posts: 1,068
From: Kincardine, Ontario Canada yeah Canada bitches
Default

he onlt put 11000 km's on it so it could take 2 years to show up.

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:59 PM.