2nd Generation Specific 1986-1992 Discussion

tmic limits

Thread Tools
 
Search this Thread
 
Old Aug 10, 2006 | 04:58 PM
  #1  
jdm12a's Avatar
Thread Starter
Senior Member
 
Joined: Nov 2005
Posts: 285
From: columbus ohio
Default

i was jus wondering how many hp or lbs of boost the stock turboII intercooler is safely good to. i tried to search this topic but couldnt find anything
Old Aug 10, 2006 | 08:52 PM
  #2  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

Unless its winter out, or you have meth injection usually past 11psi on the stock turbo you won't make any more power because the compressor is generating too much heat for that tiny IC.
Old Aug 11, 2006 | 09:40 AM
  #3  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

yep. with a better turbo you could maybe get away with another 1-2 psi
Old Aug 11, 2006 | 01:24 PM
  #4  
1988RedT2's Avatar
Super Moderator
 
Joined: Apr 2002
Posts: 2,535
From: VA
Default

So.... what would be a hypothetical boost limit if you were running water/alcohol injection? How much of a factor is plumbing size?
Old Aug 11, 2006 | 08:25 PM
  #5  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

I've done 16+psi out of the stock turbo on meth injection with the stock top mount in Arizona 105deg heat. Intake temps were 140 after pulling 4th gear. If you can keep those intake temps down you will make more power at higher boost levels on the stock turbo...
Old Aug 12, 2006 | 12:19 PM
  #6  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

Originally Posted by 1988RedT2' post='832426' date='Aug 11 2006, 11:24 AM

So.... what would be a hypothetical boost limit if you were running water/alcohol injection? How much of a factor is plumbing size?


id say your boost limit is due to two things.



1. intake heat; with the stock setup, anything over 10psi is just heating up the intake, and while you can raise the boost more, you start to run into detonation problems, so you're power limited, cause its not real safe.



2. flow: if heat weren't an issue you can boost higher, but the turbo really doesnt flow any more, its just too small....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
recian
Performance Mods
3
Sep 17, 2012 09:13 AM
maizerage
Rotary Engine Building, Porting & Swaps
4
Jan 25, 2010 12:16 PM
Deano
Rotary Engine Building, Porting & Swaps
8
Jan 19, 2005 04:32 AM
mazdaspeed7
Insert BS here
7
Aug 14, 2003 06:41 PM
Racer X
Single Turbo Discussion
6
Jun 18, 2003 03:04 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:32 PM.