NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Tail Lights, Dash Lights,parking Lights Not Workin (https://www.nopistons.com/2nd-generation-specific-17/tail-lights-dash-lights-parking-lights-not-workin-11739/)

rphilly 02-03-2003 09:48 PM

my taillights dont work, and neither do my dash light, but my brake lights do and also my reverse lights, my main fuse in the engine bay is broken off.... could this be the problem???

serpent12 02-04-2003 03:48 AM

Might be, replace any fuse thats burned out, and see if their still out.

FCmaniac 02-04-2003 06:22 AM

If you cant salvage that fuse block, email one of the guys selling 2nd gen parts in the for sale section... someone probably has one. So, is it the 80amp fuse thats broken off but everything else still works??



Its Chris by the way... I was trying to help you on IM last night for a bit.

rphilly9449 02-04-2003 12:41 PM

yes is it the 80 amp fuse... there are 2 prongs that the fuse goes into and those are broken off.... im gonna buy a headlight switch if i can find one somewhere https://www.nopistons.com/forums/pub...IR#>/angry.png cant figure this car out

j9fd3s 02-04-2003 12:46 PM

the main fuse is bolted in there. 1 bolt on each side



mike

Rob x-7 02-04-2003 05:25 PM


Originally Posted by j9fd3s' date='Feb 4 2003, 01:46 PM
the main fuse is bolted in there. 1 bolt on each side



mike

probably why its broken, some animal tried removing it I guess, lol



The wiring harness going to the light switch can also burn out.

rphilly9449 02-04-2003 06:13 PM

so where could i get a new harness?????

https://www.nopistons.com/forums/pub...IR#>/dunno.gif

j9fd3s 02-04-2003 06:17 PM

mazda, its not very expensive



mike

YucA 02-04-2003 06:30 PM

that happened to my FC. I had to replace the light switch. the board got fried in the switch. got it at a junk yard.



check that out before getting a whole new harness.

Rob x-7 02-04-2003 07:30 PM


Originally Posted by YucA' date='Feb 4 2003, 07:30 PM
that happened to my FC. I had to replace the light switch. the board got fried in the switch. got it at a junk yard.



check that out before getting a whole new harness.

I only meant to also check the harness, not the WHOLE harness, just the one that goes to the light switch.

According to Jim its really only one wire that goes bad in it, so a harness

isnt needed, just a wire repair.


All times are GMT -5. The time now is 07:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands