I just got an RX7 but the previous owner was in the middle of a steering rack install. The car is an 88 NA. The steering rack is in place and there are three ports in it but i dont know what hoses go where. Any help would be appreciated.

Thanks

Josh

 

www.teamfc3s.com



go to the online factory service manuals (FSM)....under steering obviously.



-Marc

 

Those lines were for the PS, that screwed in there. If you, or he has taken the PS pump off, then just get some quick steel (from wally fart) and putty up the holes. Or you could put a true non PS rack and pinion on it.

 

Puddy? I think he wants to keep the p/s.

 

OK, in that case the lines are metal, and they can only go one way.

 

I have one of the three lines on, but the two coming directly from the top of the pump line up at the same holes. There is no way that i can tell what goes where. I will look at www.teamfc3s.com though and see if they have. Thanks for the site, and thanks for the help.

Josh

 

I looked at the website with the service manual and got the hoses connected. Thanks for the help guys.

Josh