NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)

- 2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)

- - Steering Rack (https://www.nopistons.com/2nd-generation-specific-17/steering-rack-19076/)

stealth94rttt

06-15-2003 11:46 AM

I just got an RX7 but the previous owner was in the middle of a steering rack install. The car is an 88 NA. The steering rack is in place and there are three ports in it but i dont know what hoses go where. Any help would be appreciated.

Thanks

Josh

RotaryRocket219

06-15-2003 02:10 PM

www.teamfc3s.com

go to the online factory service manuals (FSM)....under steering obviously.

-Marc

wanta be boosted

06-15-2003 02:29 PM

Those lines were for the PS, that screwed in there. If you, or he has taken the PS pump off, then just get some quick steel (from wally fart) and putty up the holes. Or you could put a true non PS rack and pinion on it.

RotaryRocket219

06-15-2003 02:32 PM

Puddy? I think he wants to keep the p/s.

wanta be boosted

06-15-2003 02:34 PM

Quote:

I think he wants to keep the p/s.

OK, in that case the lines are metal, and they can only go one way.

stealth94rttt

06-15-2003 08:04 PM

I have one of the three lines on, but the two coming directly from the top of the pump line up at the same holes. There is no way that i can tell what goes where. I will look at www.teamfc3s.com though and see if they have. Thanks for the site, and thanks for the help.

Josh

stealth94rttt

06-16-2003 12:09 PM

I looked at the website with the service manual and got the hoses connected. Thanks for the help guys.

Josh

All times are GMT -5. The time now is 10:23 PM.