I believe the S5 threads are 12x1.25, and the s4 is 12x1.5, I dont think I will be able to re-tap my S4 **** will I?



Can I use my S4 N/A shifter on a S5 TII transmission?

 

In this post there seems to be a good explanation.



When I was looking for a new **** (for my S4-threaded short shifter), I noticed there are a whole bunch for the S5 thread, but I could find none for the S4 thread. It shouldn't be difficult to find a **** that fits (unless you're dead set on having a stock ****).

 

I already have a voodoo **** thats engraved, its S4 N/A, im going S5 TII transmission and dont know what to do with the ****



I looked through that thread, there was one guy who says he has been interchanging them for quite some time now, I was hoping he would chime in again

 

ive had both and ive put a s4 shifter in an s5 both were na's they both fit just the s5's is shorter i belive

 

im going from s4 n/a-s5 TII

 

Yes the threads on the ***** between S4 and S5 are different. It's been awhile since I have threaded any and can't remember exactly what the threads are.

The S4 and S5 shifters are pretty much the same length.

If you can't rework your custom ****; swap the whole shifter.

 

[quote name='DareBee' date='May 5 2005, 08:24 AM']

If you can't rework your custom ****; swap the whole shifter.


[/quote]



thats what I wanted to know, if I could swap the whole shifter or not

 

S5 is the odd ball. The S4 and FD are the same.

 

[quote name='cymfc3s' date='May 5 2005, 10:27 PM']S5 is the odd ball. The S4 and FD are the same.


[/quote]

you mean the threads, or the whole shifter?

 

just the thread size. But seriously, its not the size of the shifter that counts, its how you use it.