i had emailed hayes and they called me back and the guy said that the most i could do to an n/a was a stage 1 street port becuase of the 5th and 6th ports. does any of this kinda of stuff ringa bell to yall or could i expect more from a n/a engine????
https://www.nopistons.com/forums/pub...DIR#>/spam.gif |
The hayes guys like to play by the rules. Ignore him, lol. You can just wire the 5th & 6th ports open and go full out bridgeport if you want. What are you looking for? Street performance? Street/Strip performance? Mostly Race? Or ALL race? There's a dif between them....you can easily get over 300HP all motor.
|
well i need something drivable but i also want something that i can kick ass with sometimes and have an ok engine life
|
also how can i wire open the 5th and 6th ports
https://www.nopistons.com/forums/pub...#>/BURNOUT.gif |
Push them open and wrap wire around them and twist.
I bought a couple of Bosch 30 Amp relays and ordered my solenoids yesterday in an attempt to make them electric. I'll let you know how it goes. With the 6 ports totally closed the motor seems to lose power @ 5,000 RPM. With them wired open it loses some bottem end torque but screams up to it's redline. |
I would go w/ a larger streetport. I wouldnt go nuts w/ a bridge or jbridge or peripheal...those are basically race only. A large streetport will gain you 40HP or so and depending on what else you do to the car, you could easily have a nice quick NA that is still reliable on the street.
As for the 5th & 6th ports, you just wire the actuators to stay open all the time...I don't have a step by step for this, but I'm sure somebody on here does, lol...you'll loose a lil low end torque(like NAs have it to begin w/)...but you'll gain in the top...its a loose/win situation, lol... |
well besides hayes what are some other good places that i can get it ported at and does anybody (pleaing to god lol) have any instructions on how to do the 5th and 6th port thing?? :flush:
|
Try www.pineappleracing.com
I've heard good things about them....and i'm sure somebody will come along w/ the 5th & 6th ports answer...I know its not hard, I just dont know the exact method... |
i know this is a real dumbass question but what do the 5th and 6th ports do for ya and how does it help if there always open :bigok:
|
the only downside to having your 5 & 6 ports wired open is you lose a little but of lowend torque. that is a ok with me https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
All times are GMT -5. The time now is 09:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands