Pulsation Damper
#11
Originally Posted by teknics' date='Nov 25 2003, 09:41 AM
[quote name='13BAce' date='Nov 25 2003, 11:56 AM'] Marren Motorsports, http://www.injector.com, sells an aftermarket one at http://www.injector.com/fueldampners.php. It can be adapted to a stock rail fairly easily:
kevin. [/quote]
You can cut off your old PD and weld a 3/8" NPT male bung onto the end, or you could get an 87-88 TII primary rail, remove the PD, tap that end, and get an adapter to run the new PD.
#12
Originally Posted by 13BAce' date='Nov 25 2003, 12:54 PM
[quote name='teknics' date='Nov 25 2003, 09:41 AM'] [quote name='13BAce' date='Nov 25 2003, 11:56 AM'] Marren Motorsports, http://www.injector.com, sells an aftermarket one at http://www.injector.com/fueldampners.php. It can be adapted to a stock rail fairly easily:
kevin. [/quote]
You can cut off your old PD and weld a 3/8" NPT male bung onto the end, or you could get an 87-88 TII primary rail, remove the PD, tap that end, and get an adapter to run the new PD. [/quote]
what "adaptor" would i need if i went the "87-88TII primary rail with this dampener on it" way. im not clear on what the adapor would be for.
kevin.
#14
Originally Posted by teknics' date='Nov 25 2003, 10:48 AM
[quote name='13BAce' date='Nov 25 2003, 12:54 PM'] [quote name='teknics' date='Nov 25 2003, 09:41 AM'] [quote name='13BAce' date='Nov 25 2003, 11:56 AM'] Marren Motorsports, http://www.injector.com, sells an aftermarket one at http://www.injector.com/fueldampners.php. It can be adapted to a stock rail fairly easily:
kevin. [/quote]
You can cut off your old PD and weld a 3/8" NPT male bung onto the end, or you could get an 87-88 TII primary rail, remove the PD, tap that end, and get an adapter to run the new PD. [/quote]
what "adaptor" would i need if i went the "87-88TII primary rail with this dampener on it" way. im not clear on what the adapor would be for.
kevin. [/quote]
The PD in the picture is 3/8" NPT female. You will have to tap the rail with either a 1/4" NPT or 3/8" NPT tap. Then you'll need a male/male union to put the PD on the rail. Don't forget to use teflon tape.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)