|
Originally Posted by 13BAce' date='May 19 2002, 03:28 PM
[quote name='vosko' date='May 19 2002, 02:35 PM']ok first problems
one) can't get front oil cooler hose off! what size wrenches do i need https://www.nopistons.com/forums/pub...DIR#>/wink.png two) i was trying to undo the ps/ac bracket to get it out of the way. one of the bolts won't move and you can only fit an open wrench in there so it keeps slipping off those are my only problems so far https://www.nopistons.com/forums/pub...DIR#>/wink.png took off the fuel rails today, took off the fan,shroud still have to take off the ps/ac bracket and or pumps, motor mounts, tranny bolts, downpipe, that's about it then engine is ready to remove ! https://www.nopistons.com/forums/pub...1047683785.gif i went and bought a 1 1/16th wrench. my friend is buying a 23mm wrench and socket. so i should be set https://www.nopistons.com/forums/pub...IR#>/smile.png |
ok i talked to turborotor, i have to remove the PS pump first
also i tried a 22mm wrench on the banjo's that's not the correct size.... |
Originally Posted by vosko' date='May 19 2002, 03:56 PM
ok i talked to turborotor, i have to remove the PS pump first
also i tried a 22mm wrench on the banjo's that's not the correct size.... |
22 worked out perfect for me... and yes, ps has to come off first to get hte whole bracket off. I had to use a 4 foot breaker bar to get my oil cooler lines off my oil cooler...
|
oops with all the gunk on there 22 didn't want to fit. i got it off pretty easily see my new thread https://www.nopistons.com/forums/pub...IR#>/smile.png
|
| All times are GMT -5. The time now is 02:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands