2nd Generation Specific 1986-1992 Discussion

Ok, drivetrain questions!

Thread Tools
 
Search this Thread
 
Old 03-17-2006, 02:08 PM
  #1  
Senior Member
Thread Starter
 
rowtareh's Avatar
 
Join Date: Jan 2004
Location: Columbia IL/St. Louis MO
Posts: 2,748
Default

Is the GTU drivetrain just as "beefy" as the TII's. Looking for either a TII roller, or a GTU/GXL if the drivetrain is the same. Is it? I know the TII can mount up to the 13b-RE/REW but one bolt hole will be empty, and you have to change out the counterweight.



I am trying to figure this **** out, and what my best option is before buying a roller or entire drivetrain. I am purchasing my old 88 SE on Sunday, and am going to start (very slowly!!!) on a turbo swap. Just trying to get the easy things done first as far as drivetrain, suspension, etc. Then figure out what motor, ecu, turbo to run on the car.



Thanks for any info

Justin
rowtareh is offline  
Old 03-17-2006, 02:44 PM
  #2  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

the turbo trans/driveshaft/rear/axles are different from the non turbo stuff.
j9fd3s is offline  
Old 03-17-2006, 03:54 PM
  #3  
Senior Member
Thread Starter
 
rowtareh's Avatar
 
Join Date: Jan 2004
Location: Columbia IL/St. Louis MO
Posts: 2,748
Default

Originally Posted by j9fd3s' post='808424' date='Mar 17 2006, 03:44 PM

the turbo trans/driveshaft/rear/axles are different from the non turbo stuff.


ehhh, how different? is it direct fit, or is some modification needed to be done?
rowtareh is offline  
Old 03-17-2006, 05:34 PM
  #4  
Senior Member
 
teknics's Avatar
 
Join Date: Dec 2002
Location: Wayne, NJ
Posts: 4,837
Default

Originally Posted by rowtareh' post='808434' date='Mar 17 2006, 04:54 PM



ehhh, how different? is it direct fit, or is some modification needed to be done?






you can use an n/a trans on a turbo motor. the n/a stuff is just uber weak. as in,m you'll blow it all up from the power.



as well as the open diff and axles which you'll also snap with a turbo swap's power.



it's 10000x easier to start with a t2. finding a rolling t2 tho is no easy task. i do know of someone with a roller t2 for cheap tho, needs the rear 1/4 panel replaced. he had it not too long ago, may have sold it.



kevin.
teknics is offline  
Old 03-17-2006, 06:21 PM
  #5  
Senior Member
Thread Starter
 
rowtareh's Avatar
 
Join Date: Jan 2004
Location: Columbia IL/St. Louis MO
Posts: 2,748
Default

Well, the 88 SE I am starting with is freshly painted and all the dents were pulled. It had alot of body work done, and it was done by a professional who use to do hot rods.



I actually found some basic information on the TII drivetrain. Seems that you have to do some modification to the transmission tunnel.



But if that is it, it should just swap "right in" with not alot of modification done to it.



And the price I am getting for the 88 SE, you CAN NOT BEAT!! It is a good deal. I would love to start right off the bat with a TII, but it's hard to find, and most people want 1500+ for it.



Besides, the turbo transplant into a car that use to be N/A.
rowtareh is offline  
Old 03-17-2006, 09:22 PM
  #6  
Senior Member
Thread Starter
 
rowtareh's Avatar
 
Join Date: Jan 2004
Location: Columbia IL/St. Louis MO
Posts: 2,748
Default

Hmmm, may have found a complete car, updates to follow if anybody cares to know.
rowtareh is offline  
Old 03-18-2006, 12:21 AM
  #7  
Senior Member
 
donhayes's Avatar
 
Join Date: Jan 2003
Location: El Paso, TX
Posts: 485
Default

do tell
donhayes is offline  
Old 03-18-2006, 12:29 PM
  #8  
Senior Member
Thread Starter
 
rowtareh's Avatar
 
Join Date: Jan 2004
Location: Columbia IL/St. Louis MO
Posts: 2,748
Default

Car I am looking at is an 88 TII. Blue, S5 turbo, and manifold. Racing beat exhaust, 10AE interior, straight body. Does not run well right now, could either be CAS or TPS. Has the infamous 3800rpm hesitation. Just got to check the carfax on it, and if everything clears, I am going to look at it on Tuesday. Pictures to follow also.



I am disclosing the price, I think that would be stupid of me to do. But the price is really good for what it is.
rowtareh is offline  
Old 03-18-2006, 01:26 PM
  #9  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

carfax is pretty useless for a car that old....
j9fd3s is offline  
Old 03-19-2006, 05:01 PM
  #10  
Senior Member
Thread Starter
 
rowtareh's Avatar
 
Join Date: Jan 2004
Location: Columbia IL/St. Louis MO
Posts: 2,748
Default

Originally Posted by j9fd3s' post='808544' date='Mar 18 2006, 02:26 PM

carfax is pretty useless for a car that old....


eh, it'll give me some information though.



it had detailed info on a 84 GSL-SE I ran through, all the way to the first registration back in 85.
rowtareh is offline  


Quick Reply: Ok, drivetrain questions!



All times are GMT -5. The time now is 02:03 PM.