2nd Generation Specific 1986-1992 Discussion

Oil Injection Question

Thread Tools
 
Search this Thread
 
Old Jan 29, 2004 | 02:36 PM
  #1  
sidewinderx7's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 1,312
From: WA
Default

Im kinda concerned with my oil injection. I know all the electronics to it are hooked up, as well as the injectors and lines. However, 1 line broke when i was removing it, i since fixed it, however oil did leak out of 1 line. Since its transparent, you can tell when oil is going through it. Well the engine has only idled for about 5 minutes at most and i noticed that line hadent become full of oil. I was wondering how often it injects oil into the combustion chamber and if i need to idle the car longer for it to go back to normal.



Thanks,

--Travis
Old Jan 29, 2004 | 02:52 PM
  #2  
FrestyleFC3S's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 2,259
From: Schofield Barracks, HI
Default

i would suggest just removing it and plugging the injector holes and running premix



if all the lines are filled and that ones not...then id be worried that its not working right



so either fix that one line, or get rid of the whole system......if you dont fix the line or remove the system youll have to premix



and youre getting stand alone soon, so youre gonna have to premix anyways



soooooooooooooooooooooooooo .... i guess start practicing now eh?
Old Jan 29, 2004 | 03:45 PM
  #3  
BigTurbo74's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 2,315
Default

word
Old Jan 29, 2004 | 03:46 PM
  #4  
FrestyleFC3S's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 2,259
From: Schofield Barracks, HI
Default

Originally Posted by BigTurbo74' date='Jan 29 2004, 05:45 PM
word
up?
Old Jan 29, 2004 | 04:39 PM
  #5  
sidewinderx7's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 1,312
From: WA
Default

yeah, that would make sense huh? unfortunatly the omp is electrical on s5, and when you take it off it will send electrical errors to the ecu and go into retard mode. (from what i hear, but i do know it sends codes). Hence why you cant just take it off a s5. However, on a s4, they are mechanical and you can strip it right off.





lol.. yeah, im gonna buy some 2 cycle oil and start putting it in just to be safe. Im not sure what exactly is going on with it .. better safe than sorry
Old Jan 29, 2004 | 04:45 PM
  #6  
FrestyleFC3S's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 2,259
From: Schofield Barracks, HI
Default

hmm...cant you rip it off....take the electrical part, and keep it plugged in...just let it hang
Old Jan 29, 2004 | 04:51 PM
  #7  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

it takes a little while for the oil to make it up the tubes, remember is only injecting like 6cc per minute, thats like a couple drops
Old Jan 29, 2004 | 05:23 PM
  #8  
sidewinderx7's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 1,312
From: WA
Default

ok cool, thats what i figured. but i wasnt sure if the tubes got primed and the injectors were whats regulating how much oil is dropped in.



i'll check it after i let it run longer.
Old Jan 29, 2004 | 05:25 PM
  #9  
sidewinderx7's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 1,312
From: WA
Default

Originally Posted by FrestyleFC3S' date='Jan 29 2004, 02:45 PM
hmm...cant you rip it off....take the electrical part, and keep it plugged in...just let it hang
from what ive heard from a pretty reliable engine builder, when the ecu reads the omp isnt working right the engine will go into a retard mode.
Old Jan 29, 2004 | 05:25 PM
  #10  
FrestyleFC3S's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 2,259
From: Schofield Barracks, HI
Default

the only thing i dont like is... you said theyre all full now...except one....



why would one not ..they all inject at the same ratio



All times are GMT -5. The time now is 05:29 AM.