No start
12-06-2010, 02:41 PM
#1
Member
Thread Starter
Join Date: Dec 2010
Location: Mesa Arizona
Posts: 31
Ok i Am going Crazy here. ive posted this on The Rx7 club and no Help there. I was going 70 down the freeway and It lost Half of the Power in the engine. Its a 1987 N/A 5 Speed. i thought it was My Bad Alt so I replaced it. no dice. one rotor was Lean one was Rich so i replaced the Primary Injectors with New Delphi's stock resistance's and CC's. basically a Oem replacement. Have spark and fuel getting evenly to each rotor. but it wont start. If i Do get it to start it runs like **** and dies after about 5 min of runtime then Refuses to start up again. Please Help
12-09-2010, 07:30 PM
#5
Senior Member
Join Date: Jul 2008
Location: st. louis missouri
Posts: 125
could be the MAF your right. i would get some cleaner(only for MAF sensors) and spray it out (ONLY THE MAF STUFF) i assume no MSD box? then i would check all the grounds and clean them up. i allways say grounds couse it seems like i allways run into grounding problems. i am allways cleaning and checking the grounds and it still just bit me in the *** a few weeks ago.
01-16-2011, 05:17 PM
#6
Member
Thread Starter
Join Date: Dec 2010
Location: Mesa Arizona
Posts: 31
Ok i have figured i Have No spark at all ive replaced ALL the relays The Cas The ECU and Its wiring replaced The coils Trailing and Leading Checked and Cleaned ALL Grounds and NO Spark! ive Checked all Ohm and voltage as per the FSM and still no dice all are within specs am i Missing something?
