2nd Generation Specific 1986-1992 Discussion

No start

Old Dec 6, 2010 | 02:41 PM
  #1  
AdamMaxwell's Avatar
Thread Starter
Member
 
Joined: Dec 2010
Posts: 31
From: Mesa Arizona
Default

Ok i Am going Crazy here. ive posted this on The Rx7 club and no Help there. I was going 70 down the freeway and It lost Half of the Power in the engine. Its a 1987 N/A 5 Speed. i thought it was My Bad Alt so I replaced it. no dice. one rotor was Lean one was Rich so i replaced the Primary Injectors with New Delphi's stock resistance's and CC's. basically a Oem replacement. Have spark and fuel getting evenly to each rotor. but it wont start. If i Do get it to start it runs like **** and dies after about 5 min of runtime then Refuses to start up again. Please Help
Old Dec 6, 2010 | 02:43 PM
  #2  
AdamMaxwell's Avatar
Thread Starter
Member
 
Joined: Dec 2010
Posts: 31
From: Mesa Arizona
Default

Also The compression is Healthy at 120 per Rotor all 3 Facings
Old Dec 9, 2010 | 02:52 AM
  #3  
RX7 13B 4 UR AZZ's Avatar
Senior Member
 
Joined: Feb 2003
Posts: 1,591
From: Miami, Florida
Default

i say change the plugs i always carried around a set in the car just in case.
Old Dec 9, 2010 | 10:05 AM
  #4  
AdamMaxwell's Avatar
Thread Starter
Member
 
Joined: Dec 2010
Posts: 31
From: Mesa Arizona
Default

The Plugs Are Brand New both coils are New. im Thinking its The MAF or the Fuel pump
Old Dec 9, 2010 | 07:30 PM
  #5  
wanglerrx7's Avatar
Senior Member
 
Joined: Jul 2008
Posts: 125
From: st. louis missouri
Default

could be the MAF your right. i would get some cleaner(only for MAF sensors) and spray it out (ONLY THE MAF STUFF) i assume no MSD box? then i would check all the grounds and clean them up. i allways say grounds couse it seems like i allways run into grounding problems. i am allways cleaning and checking the grounds and it still just bit me in the *** a few weeks ago.
Old Jan 16, 2011 | 05:17 PM
  #6  
AdamMaxwell's Avatar
Thread Starter
Member
 
Joined: Dec 2010
Posts: 31
From: Mesa Arizona
Default

Ok i have figured i Have No spark at all ive replaced ALL the relays The Cas The ECU and Its wiring replaced The coils Trailing and Leading Checked and Cleaned ALL Grounds and NO Spark! ive Checked all Ohm and voltage as per the FSM and still no dice all are within specs am i Missing something?
Old Jan 17, 2011 | 03:29 AM
  #7  
RicerJ's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 737
From: Folsom, CA
Default

so you got no spark does it sound like it wants to start? try doing the deflood method and see if it helps any
Old Jan 17, 2011 | 11:26 AM
  #8  
AdamMaxwell's Avatar
Thread Starter
Member
 
Joined: Dec 2010
Posts: 31
From: Mesa Arizona
Default

nope don't sound like it wants to start. deflooded 30 times
Old Jan 17, 2011 | 12:31 PM
  #9  
jwteknix's Avatar
Senior Member
 
Joined: Sep 2005
Posts: 1,440
From: Wayne NJ
Default

new injector o rings? is ur cat clogged?
Old Jan 17, 2011 | 08:27 PM
  #10  
RicerJ's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 737
From: Folsom, CA
Default

Fuel filter clogged?

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:09 PM.