Is there some place on the web that has a wiring diagram for installing a MSD 6A in a non-turbo second gen ?

 

Check the how-tos at www.fc3s.org..I know they have a writeup for the crane hi-6, i think they might have one for the MSD as well...

 

Let me know how that goes. I'm wondering if it worth the $$ to add to my motor.

 

Oh yea the MSD 6A is great. I use to have a 78 blazer and it was a paint to start up in the mornings. But once I put in An msd It worked great.

As far as the rx-7 goes it helps with start up the car a ton, ideal is a little smoother, and throttle response is instant. If you want you can get then on ebay (used) for about $60. Probably some of the best $60 you can spend. As far as for turbo applications I know that some cars that are not in perfect running condition you can run a little lean fuel mixture in the higher rpm range. And with the high-energy output of the MSD it can make detonations problem worst. But that’s only in a few cases that I have heard the turbo rx-7 have had problems

 

hmm there are couple floating around. check on Teds site at www.fc3s-pro.com yeap some info there.







it'll be almost the same as the crane but the colors might be a bit different. I gained about 30 miles a tank with my hi-6. didn't notice much running difference though.