Magor Drivebility Problems

Reply Subscribe

Thread Tools

Search this Thread

Feb 18, 2003 | 10:14 PM

#11

svo_jon

Thread Starter

Junior Member

Joined: Feb 2003

Posts: 9

how much compession should it have (psi)?

Feb 18, 2003 | 10:28 PM

#12

turborotor

Senior Member

Joined: Nov 2001

Posts: 1,622

From: LA, USA

anything below 80psi, is not good

Not having even pulses between rotor phases or rotors is not good.

C

Feb 19, 2003 | 05:30 PM

#13

svo_jon

Thread Starter

Junior Member

Joined: Feb 2003

Posts: 9

what do you mean by rotor phases? What do I need to know to do a correct compression test on a rotary engine?

thanks

Feb 19, 2003 | 06:04 PM

#14

j9fd3s

Senior Member

Joined: May 2002

Posts: 22,465

From: California

Quote:

Originally Posted by svo_jon' date='Feb 19 2003, 03:30 PM

what do you mean by rotor phases? What do I need to know to do a correct compression test on a rotary engine?

thanks

there are 3 chambers for each spark plug, so you are looking for 3 even bounces on your comression guage. take out or push the schrader valve on the tester

mike

Feb 20, 2003 | 09:48 PM

#15

svo_jon

Thread Starter

Junior Member

Joined: Feb 2003

Posts: 9

so I did a compression test and the second rotor makes only about 40 psi. I guess I found the problem. So this means a rebuild right? Anyone know of a good place to get one on the wet coast/Oregon area? How much should I expect to pay? Any help would be great

thanks