a little story and a few ?'s
Senior Member
Joined: May 2002
Posts: 22,465
From: California
Originally Posted by jdmrbust' post='791870' date='Jan 3 2006, 11:10 PM
well my turbo(stock) blew- i have to run this setup to get my car going- its all i got. I can go to a 5.6lb spring or a 3.5lb one- which is prob what ill do until i can get fuel set up
if you keep it out of boost, it should run ok
Senior Member
Joined: May 2005
Posts: 959
If you know you don't have the fuel setup, I would definately run a lower spring in the wastegate. Which type of WG did you get?
As you've probably determined from everybody else, your current stock injectors, fpr, etc won't be enough. At the very least, put some large injectors in there for the secondaries..run a low 5-6psi of boost with a WB02 and see where your at. When you get into T4 turbos and larger injectors...a standalone is not too far off in your future, so just keep that in mind. You can only push a stock or even chipped ECU so far...
As you've probably determined from everybody else, your current stock injectors, fpr, etc won't be enough. At the very least, put some large injectors in there for the secondaries..run a low 5-6psi of boost with a WB02 and see where your at. When you get into T4 turbos and larger injectors...a standalone is not too far off in your future, so just keep that in mind. You can only push a stock or even chipped ECU so far...
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
