NoPistons -Mazda Rx7 & Rx8 Rotary Forum
Page 2 of 5
1
2
3
4
Last »
Show 40 post(s) from this thread on one page

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   JSPEC #2 IS IN! (https://www.nopistons.com/2nd-generation-specific-17/jspec-2-a-3790/)

13BAce 07-16-2002 12:20 PM
Originally Posted by vosko' date='Jul 16 2002, 12:10 PM
they are compression tested. there is no way to test the coolant seals....
You could try pressure testing it with coolant in the motor. You'll probably be able to see some leaking if the seals are bad.

vosko 07-16-2002 12:42 PM
Originally Posted by Rotaryman88' date='Jul 16 2002, 01:10 PM
Best of luck to ya. Did you get the new motor for free? Or did they not have a warranty of such? Good luck, I guess it takes a little more abuse for Vosko to learn a lesson, lol....
replacement engine was free. just had to rent another hoist, drive there, etc. it will be worth it as long as this engine is good https://www.nopistons.com/forums/pub...IR#>/smile.png

vosko 07-16-2002 12:42 PM
Originally Posted by 13BAce' date='Jul 16 2002, 01:20 PM
[quote name='vosko' date='Jul 16 2002, 12:10 PM']they are compression tested. there is no way to test the coolant seals....
You could try pressure testing it with coolant in the motor. You'll probably be able to see some leaking if the seals are bad.[/quote]

i'll test when its in the car :P

13BAce 07-16-2002 01:08 PM
Originally Posted by vosko' date='Jul 16 2002, 03:42 PM
[quote name='13BAce' date='Jul 16 2002, 01:20 PM'][quote name='vosko' date='Jul 16 2002, 12:10 PM']they are compression tested. there is no way to test the coolant seals....
You could try pressure testing it with coolant in the motor. You'll probably be able to see some leaking if the seals are bad.[/quote]

i'll test when its in the car :P[/quote]

You could try it while the motor is out of the car if you have everything plugged while you do it. If water doesn't leak on the outside it may be leaking to the inside.

Rob x-7 07-16-2002 06:32 PM
Good luck, I havent heard good things about these J=specs right out of the crate

Rotaryman88 07-16-2002 07:48 PM
Originally Posted by vosko' date='Jul 16 2002, 02:42 PM
[quote name='Rotaryman88' date='Jul 16 2002, 01:10 PM']Best of luck to ya. Did you get the new motor for free? Or did they not have a warranty of such? Good luck, I guess it takes a little more abuse for Vosko to learn a lesson, lol....
replacement engine was free. just had to rent another hoist, drive there, etc. it will be worth it as long as this engine is good https://www.nopistons.com/forums/pub...IR#>/smile.png[/quote]

Good Jspec??? https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...>/rolleyes.gif

bigtime 07-16-2002 08:02 PM
lol will u ever have a running car?

13BAce 07-16-2002 08:46 PM
Originally Posted by bigtime1148' date='Jul 16 2002, 11:02 PM
lol will u ever have a running car?
Define running. :P

Rotaryman88 07-16-2002 09:06 PM
Who me? My car ran...











on one rotor https://www.nopistons.com/forums/pub...DIR#>/wink.png

13BAce 07-16-2002 09:21 PM
Originally Posted by Rotaryman88' date='Jul 17 2002, 12:06 AM
Who me? My car ran...











on one rotor <_<



Hopefully i'll have one very shortly... https://www.nopistons.com/forums/pub...DIR#>/wink.png
Yeah, you should be doing much better very soon. <_<


All times are GMT -5. The time now is 02:18 PM.
Page 2 of 5
1
2
3
4
Last »
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands