well yesterday i removed the blown jspec, drove it to newark, picked up the new one, stripped the new one, installed the new one, bolted it down. as of 3am this morning all that is left is to connect the wiring harness and put on the UIM etc. should only take another 2 hours or so https://www.nopistons.com/forums/pub...IR#>/smile.png
|
sounds goog vosko, hope it starts alright! ^_^
|
better than goog, its good! https://www.nopistons.com/forums/pub...IR#>/wacko.png
|
a non blown coolant seal will be a plus. this engine looks alot healthier. i believe the other engine had half of it rebuilt at one time...
|
w00t
Let's hope this one rolls! Don't they claim to have pre-tested all the j-specs? |
they are compression tested. there is no way to test the coolant seals....
|
whats to happen to the old one? is it looking for a home?
|
He took it back.
|
i gave it back. he is gonna rebuild it and probably use it in his race car
|
Best of luck to ya. Did you get the new motor for free? Or did they not have a warranty of such? Good luck, I guess it takes a little more abuse for Vosko to learn a lesson, lol....
|
Originally Posted by vosko' date='Jul 16 2002, 12:10 PM
they are compression tested. there is no way to test the coolant seals....
|
Originally Posted by Rotaryman88' date='Jul 16 2002, 01:10 PM
Best of luck to ya. Did you get the new motor for free? Or did they not have a warranty of such? Good luck, I guess it takes a little more abuse for Vosko to learn a lesson, lol....
|
Originally Posted by 13BAce' date='Jul 16 2002, 01:20 PM
[quote name='vosko' date='Jul 16 2002, 12:10 PM']they are compression tested. there is no way to test the coolant seals....
i'll test when its in the car :P |
Originally Posted by vosko' date='Jul 16 2002, 03:42 PM
[quote name='13BAce' date='Jul 16 2002, 01:20 PM'][quote name='vosko' date='Jul 16 2002, 12:10 PM']they are compression tested. there is no way to test the coolant seals....
i'll test when its in the car :P[/quote] You could try it while the motor is out of the car if you have everything plugged while you do it. If water doesn't leak on the outside it may be leaking to the inside. |
Good luck, I havent heard good things about these J=specs right out of the crate
|
Originally Posted by vosko' date='Jul 16 2002, 02:42 PM
[quote name='Rotaryman88' date='Jul 16 2002, 01:10 PM']Best of luck to ya. Did you get the new motor for free? Or did they not have a warranty of such? Good luck, I guess it takes a little more abuse for Vosko to learn a lesson, lol....
Good Jspec??? https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...>/rolleyes.gif |
lol will u ever have a running car?
|
Originally Posted by bigtime1148' date='Jul 16 2002, 11:02 PM
lol will u ever have a running car?
|
|
Originally Posted by Rotaryman88' date='Jul 17 2002, 12:06 AM
Who me? My car ran...
on one rotor <_< Hopefully i'll have one very shortly... https://www.nopistons.com/forums/pub...DIR#>/wink.png |
Just outa curiosity, whats the mileage on that motor of yours?
|
Originally Posted by Rotaryman88' date='Jul 17 2002, 12:27 AM
Just outa curiosity, whats the mileage on that motor of yours?
|
I guessed 10K damn...you must drive A LOT...you've only had that motor for like 3 months or so i thought..oh well.
|
Originally Posted by Rotaryman88' date='Jul 17 2002, 12:55 AM
I guessed 10K damn...you must drive A LOT...you've only had that motor for like 3 months or so i thought..oh well.
|
Yea, thats what i ment, the rebuild, lol....its all good. It sucks that thing blew so early though...crazy t78s https://www.nopistons.com/forums/pub...>/rolleyes.gif
|
well its alive idle's nice. just gotta see where the bastard vacuum leak is now !
|
That was quick...way to go.
BASTARD!!!!...sorry, jealous venting https://www.nopistons.com/forums/pub...#>/biggrin.png |
Ahhh yes. Vacuum leaks. Yummmmyyy!
|
Originally Posted by vosko' date='Jul 17 2002, 01:19 AM
well its alive idle's nice. just gotta see where the bastard vacuum leak is now !
|
Originally Posted by 13BAce' date='Jul 17 2002, 10:02 AM
[quote name='vosko' date='Jul 17 2002, 01:19 AM']well its alive idle's nice. just gotta see where the bastard vacuum leak is now !
i wanted to go drag racing today that doesn't look likely :( well i drove it around the block was fine lots of smoke which is too be expected but i DEF have a vacuum leak. i have no clue where! there are only like 2 vacuum hoses on my entire engine.... hmm |
Use some carb cleaner to try to find the leak.
|
i'm gonna do that after i get off work https://www.nopistons.com/forums/pub...IR
|
oh yeah when i got it started, shot a 5 foot flame into my garage and a few moments later backfired like a shotgun blast https://www.nopistons.com/forums/pub...#>/biggrin.png
|
Originally Posted by vosko' date='Jul 17 2002, 01:22 PM
oh yeah when i got it started, shot a 5 foot flame into my garage and a few moments later backfired like a shotgun blast https://www.nopistons.com/forums/pub...#>/biggrin.png
|
Originally Posted by 13BAce' date='Jul 17 2002, 11:39 AM
[quote name='vosko' date='Jul 17 2002, 01:22 PM']oh yeah when i got it started, shot a 5 foot flame into my garage and a few moments later backfired like a shotgun blast https://www.nopistons.com/forums/pub...#>/biggrin.png
after i drove the car around the block my neighbor came out. " DON"T YOU DARE START THAT POINTING AT MY HOUSE!!!!" :P |
Originally Posted by vosko' date='Jul 17 2002, 12:43 PM
[quote name='13BAce' date='Jul 17 2002, 11:39 AM'][quote name='vosko' date='Jul 17 2002, 01:22 PM']oh yeah when i got it started, shot a 5 foot flame into my garage and a few moments later backfired like a shotgun blast https://www.nopistons.com/forums/pub...#>/biggrin.png
after i drove the car around the block my neighbor came out. " DON"T YOU DARE START THAT POINTING AT MY HOUSE!!!!" :P[/quote] Gotta love 'dem neighbors...when I was driving my SE-X around w/ one rotor and a downpipe...the neighbor kids were running around the yard w/ their hands over the ears https://www.nopistons.com/forums/pub...#>/biggrin.png |
Originally Posted by Rotaryman88' date='Jul 17 2002, 11:35 AM
[quote name='vosko' date='Jul 17 2002, 12:43 PM'][quote name='13BAce' date='Jul 17 2002, 11:39 AM'][quote name='vosko' date='Jul 17 2002, 01:22 PM']oh yeah when i got it started, shot a 5 foot flame into my garage and a few moments later backfired like a shotgun blast https://www.nopistons.com/forums/pub...#>/biggrin.png
after i drove the car around the block my neighbor came out. " DON"T YOU DARE START THAT POINTING AT MY HOUSE!!!!" :P[/quote] Gotta love 'dem neighbors...when I was driving my SE-X around w/ one rotor and a downpipe...the neighbor kids were running around the yard w/ their hands over the ears https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote] https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif https://www.nopistons.com/forums/pub...1047683785.gif I've seen that before! |
Originally Posted by Rotaryman88' date='Jul 17 2002, 02:35 PM
[quote name='vosko' date='Jul 17 2002, 12:43 PM'][quote name='13BAce' date='Jul 17 2002, 11:39 AM'][quote name='vosko' date='Jul 17 2002, 01:22 PM']oh yeah when i got it started, shot a 5 foot flame into my garage and a few moments later backfired like a shotgun blast https://www.nopistons.com/forums/pub...#>/biggrin.png
after i drove the car around the block my neighbor came out. " DON"T YOU DARE START THAT POINTING AT MY HOUSE!!!!" :P[/quote] Gotta love 'dem neighbors...when I was driving my SE-X around w/ one rotor and a downpipe...the neighbor kids were running around the yard w/ their hands over the ears https://www.nopistons.com/forums/pub...#>/biggrin.png[/quote] I drove with just a downpipe just for kicks, and it was unbearable. |
i drove my old TII with no exhaust...... i was deaf for a few minutes....... https://www.nopistons.com/forums/pub...#>/biggrin.png
|
i used to drive my chevelle around with no exhaust. actually it was a 307 with just headers. that was loud, sounded good though
|
All times are GMT -5. The time now is 03:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands