immobilized please help
Senior Member
Joined: Jul 2002
Posts: 2,467
From: Portland, OR
You can also try jumping the starter its self. just put pos. to pos. neg to neg. and see what happens. On the 89 chassis its a shorty bolt on the lower right of the starter, and a long bolt coming from the engine compartment with a nut on the tranny side(upper left starter bolt). If you wedge a wrench on the bolt side and let it turn aginst the engine block, you can crank the **** out of it from the tranny side.
Senior Member
Joined: Nov 2001
Posts: 7,316
From: Bay Area, CA
Originally Posted by Shane.Trammell' date='Jul 21 2002, 10:08 PM
hahaha well, theres not much room under there. i dont know if a breaker bar would fit or an airgun. if i can get that bad boy off i will get it checked out.
Senior Member
Joined: Jul 2002
Posts: 2,467
From: Portland, OR
Originally Posted by 13BAce' date='Jul 21 2002, 10:00 PM
[quote name='DCmina' date='Jul 21 2002, 11:35 PM']push start it!
Yeah, you would have to push that fu@ker forever! ROFLMAO.
A 12 point, 14mm socket w/ a breaker bar should do it, after you have snugged up the wrench against the block, on the engine compartment side. The nut should come off the tranny side with ease and leave you with no nuckle busters
Thread Starter
Senior Member
Joined: May 2002
Posts: 4,326
From: Richardson Texas
Originally Posted by 13BAce' date='Jul 21 2002, 09:00 PM
[quote name='DCmina' date='Jul 21 2002, 11:35 PM']push start it!
yeah i dont think i can run at 30 mph while pushing a car, although i have been training for the worlds strongest man competition so ill give it a try!
