I Need Opinions....

Reply Subscribe

Thread Tools

Search this Thread

01-15-2004, 11:01 AM

#11

NCGNETO90

Senior Member

Join Date: May 2003

Location: Boise, ID

Posts: 288

Oh. Ok. Never knew that. Thanks ronin!

01-15-2004, 11:05 AM

#12

13BINFAMOUSREX

Junior Member

Thread Starter

Join Date: Jan 2004

Posts: 17

so this is what i got.....

a ported 4 port or 6 port motor...

t4 turbo

some type of wastegate

piggy back ecu or should i run stoc t2 ecu

550 injectors....at least

and a better fuel pump....

right??

01-15-2004, 11:06 AM

#13

RONIN FC

Senior Member

Join Date: Oct 2003

Location: Boston Ma.

Posts: 1,420

Quote:

Originally Posted by 13BINFAMOUSREX' date='Jan 15 2004, 08:57 AM

i'm figuring basic law...the higher the compression rotor the lower the boost right??.....i mean i'm not tryin to build a monster race car here....but like i said i would like to be in the 13-14 mark....with or without turbo....right now i'm weighin my options.......although having a turbo and hearing that turbo spools is like harrmony to my ears.....

Boost and high C/R increases your requirement for octane. I say if you can only get a 6 port and you want turbo, get turbo rotors in there.Or the 74-78 13b rotors are 9,2 C/R with 3mm apexs stock. only problem is the lower safe rpm limit.

I personally rather keep N/A's N/A.

01-15-2004, 11:09 AM

#14

13BINFAMOUSREX

Junior Member

Thread Starter

Join Date: Jan 2004

Posts: 17

ok so you reccomend keeping the stock gxl 6 port rotors becuase that lil bit of c/r difference and portin and turboing of those right??......wat are the apex seal size on those rotores are they 2 or 3??

01-15-2004, 11:13 AM

#15

RONIN FC

Senior Member

Join Date: Oct 2003

Location: Boston Ma.

Posts: 1,420

Is it an S5 (89-91)? All FCs and FDs are 2mm.

01-15-2004, 11:15 AM

#16

13BINFAMOUSREX

Junior Member

Thread Starter

Join Date: Jan 2004

Posts: 17

01-15-2004, 11:16 AM

#17

RONIN FC

Senior Member

Join Date: Oct 2003

Location: Boston Ma.

Posts: 1,420

Get S5 rotors if you want a powerfull N/A. Higher redline too.

01-15-2004, 11:20 AM

#18

13BINFAMOUSREX

Junior Member

Thread Starter

Join Date: Jan 2004

Posts: 17

run s5 rotors regardless if i run turbo or not?

01-15-2004, 11:27 AM

#19

RONIN FC

Senior Member

Join Date: Oct 2003

Location: Boston Ma.

Posts: 1,420

Quote:

Originally Posted by 13BINFAMOUSREX' date='Jan 15 2004, 09:20 AM

run s5 rotors regardless if i run turbo or not?

N/A = Naturally Asperated. With turbo run low Compression Ratio rotors.

01-15-2004, 11:32 AM

#20

g_dripht-alex

Senior Member

Join Date: Oct 2003

Location: east meadow, new york

Posts: 419

yes run s5 rotors. s5 na rotors if your gonna make it na or s5 turbo rotors if your going turbo.

Reply Share

First
Prev
2 / 4
Next
Last