How Do I Get The Flywheel Off
04-13-2003, 08:38 PM
#5
Senior Member
Join Date: Aug 2002
Location: One hour north of chicago (Mundelein to be exact)
Posts: 811
I used a big breaker bar (1 inch drive) and the slipped a steel pipe over the end so i got a 5 foot long wrench and it came off in a jiffy. In my opinion actually pulling off the flywheel was harder b/c it's a tappered seat. I borrowed my dad's friend's puller. It also made it come off real easy.
04-13-2003, 08:46 PM
#6
Super Moderator
Join Date: Jul 2001
Location: NJ
Posts: 17,839
to get them off i have a long piece of angle iron to lock the flywheel. i use a breaker bar then put a long pipe over it and it gets it off. to actually pop the fuel off you can whack it with a piece of firewood. works like a charm 
04-13-2003, 09:10 PM
#7
Senior Member
Join Date: Oct 2001
Location: Clifton, NJ
Posts: 1,675
We have a HUGE impact gun from harbor freight. Had to hook up two 25 gallon compressors to get enough cfm to do it. One big one should work though. I usually only have problems with stock motors. Mazda used a ridicilus amount of torque on the flywheel nut. The remans are easier.
04-13-2003, 09:20 PM
#8
Senior Member
Join Date: Mar 2002
Location: Ky
Posts: 2,723
Originally Posted by Silver Ninety Three' date='Apr 13 2003, 09:10 PM
We have a HUGE impact gun from harbor freight. Had to hook up two 25 gallon compressors to get enough cfm to do it. One big one should work though. I usually only have problems with stock motors. Mazda used a ridicilus amount of torque on the flywheel nut. The remans are easier.
04-13-2003, 10:09 PM
#9
Member
Join Date: Mar 2003
Posts: 76
Originally Posted by Silver Ninety Three' date='Apr 13 2003, 06:10 PM
We have a HUGE impact gun from harbor freight. Had to hook up two 25 gallon compressors to get enough cfm to do it. One big one should work though. I usually only have problems with stock motors. Mazda used a ridicilus amount of torque on the flywheel nut. The remans are easier.
04-13-2003, 10:15 PM
#10
Senior Member
Join Date: Mar 2003
Location: ATX
Posts: 1,535
We have a HUGE impact gun from harbor freight. Had to hook up two 25 gallon compressors to get enough cfm to do it. One big one should work though. I usually only have problems with stock motors. Mazda used a ridicilus amount of torque on the flywheel nut. The remans are easier.
Gee, you have a very large tool.