2nd Generation Specific 1986-1992 Discussion

Hesitates

Thread Tools
 
Search this Thread
 
Old 01-09-2003, 10:17 PM
  #21  
Senior Member
 
'79rx7's Avatar
 
Join Date: Sep 2002
Location: Joplin, MO
Posts: 603
Default

I just sent mine off to RC Engineering, on monday, called today thursday, and they said they were done and that they would be back to me by friday, total is around $130 for all four, with shipping.



Give me a minute mines all apart i will go take a picture of that ground wire, but my car is a '79 so there are a few extra wires, but everything else is the same as yours
'79rx7 is offline  
Old 01-09-2003, 10:26 PM
  #22  
Senior Member
 
'79rx7's Avatar
 
Join Date: Sep 2002
Location: Joplin, MO
Posts: 603
Default

here is a picture of the bolt and ground wire
'79rx7 is offline  
Old 01-09-2003, 10:27 PM
  #23  
Senior Member
 
'79rx7's Avatar
 
Join Date: Sep 2002
Location: Joplin, MO
Posts: 603
Default

closer view
'79rx7 is offline  
Old 01-09-2003, 10:32 PM
  #24  
Senior Member
 
1Revvin7's Avatar
 
Join Date: Oct 2001
Location: Peoria, AZ
Posts: 10,906
Default

yes, sounds like u have bad grounds. Replace them with thicker wires and make sure contact surface is bare, no paint etc. Injectors are $25 a pop at Rc, i had mine done there and i got a pair there right now.. Anyone who is having a hesitation @ 3800 rpms its either the grounds or the secondary injectors.
1Revvin7 is offline  
Old 01-10-2003, 01:25 PM
  #25  
Member
 
rxheaven86's Avatar
 
Join Date: Jan 2003
Location: Perrineville, NJ
Posts: 43
Default

that's not totally true... yes grounds can be a problem and yes secondarys can be a problem, but i had the same problem with my rx before i re did my exhaust... if the car still has a stock exhaust or stock cats on the car then it is possible that one of the pre cats or main cats is not free flowing enough and trust me 5 out of 10 times this is the problem when you have a 3800 rpm hesitation. when mine happened i replaced the tps because that's what the first thing that read wrong was and then i fixed all the grounds and that wasn't it... all my injectors were brand new on a new motor, and sure enough i put a cat back on the car, and we cleaned out the stock cats and the car was good then about 2 days later i put the random tech cat on there that i have and the car was ******* running great. just thought you guys would like to know because noone mentioned exhaust issues in the thread, and that's what it sounds like to me
rxheaven86 is offline  
Old 01-10-2003, 01:28 PM
  #26  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

well its possible it is exhaust, but there is a bulliten on the ground



mike
j9fd3s is offline  
Old 01-10-2003, 01:28 PM
  #27  
Senior Member
 
87RX7NA's Avatar
 
Join Date: Jan 2002
Posts: 240
Default

Hmmm...Never heard that. Always good to have a new perspective though. Don't think that's my problem. My cats are hollow. Speaking of which, I still need to make that straight pipe to put on my car...
87RX7NA is offline  
Old 01-10-2003, 03:47 PM
  #28  
Super Moderator
 
Baldy's Avatar
 
Join Date: Sep 2002
Location: Tallahassee, FL
Posts: 5,425
Default

well, soon I'll be replacing some exhaust, so I'll see how that works
Baldy is offline  
Old 02-12-2003, 10:52 AM
  #29  
Senior Member
 
joe2dmax's Avatar
 
Join Date: Nov 2002
Location: gville and the burg
Posts: 150
Default

mine feels like its gonna die when i am drifting it around 25-30 mph, i thought i didnt have enough gas and when my car goes sideways, it doesnt get enough fuel.

so what do you guys think. i rev my car during drifting around 4-6k.



so it could be the ground, injectors or the cats...
joe2dmax is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
greengold
1st Generation Specific
2
08-12-2006 02:51 PM
Cowzzz
2nd Generation Specific
6
05-08-2005 06:48 PM
mazdaspeed101
2nd Generation Specific
8
02-26-2003 10:55 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Hesitates



All times are GMT -5. The time now is 02:02 AM.