Headlight Conversion Kits
Senior Member
Joined: May 2003
Posts: 1,784
Originally Posted by ColinRX7' date='Jun 1 2004, 04:14 PM
Of course it is because it's a sealbeam headlamp. MANY cars use sealbeam headlamps, they are interchangeable. The bulb is intergrated into the housing. The BULB WATTAGE is what the law is about, not the lense, just so happens our bulbs are permanently mounted to the lense+housing.
Coverting the H4 acceptable headlamp housings will mean that you separate bulb from housing, so the laws still apply to bulb wattage. Just when you change the light it's the bulb only not the housing.
There aren't any laws on lense+housing as long as they are not tinted housings. As far as aiming goes that's the drivers responsibility not the manufacturers fault.
Coverting the H4 acceptable headlamp housings will mean that you separate bulb from housing, so the laws still apply to bulb wattage. Just when you change the light it's the bulb only not the housing.
There aren't any laws on lense+housing as long as they are not tinted housings. As far as aiming goes that's the drivers responsibility not the manufacturers fault.
Senior Member
Joined: Apr 2003
Posts: 227
From: levittown PA
"""I'm figuring $54.95 for a pair, you can pick out your bulbs at the local store or I can get PIAA's if you would like.
I'll also have the non-diamond back kits like you see pretty much everywhere else for $36.99.
I'll also have some 90/100w super white bulbs for $20 if you would rather get them all at once."""
not trying to bust anything up but there on ebay for $36.97 shipped with a set of lights. you should call who ever your getting them from and see if they can lower there prices to you...~~>rite here
I'll also have the non-diamond back kits like you see pretty much everywhere else for $36.99.
I'll also have some 90/100w super white bulbs for $20 if you would rather get them all at once."""
not trying to bust anything up but there on ebay for $36.97 shipped with a set of lights. you should call who ever your getting them from and see if they can lower there prices to you...~~>rite here
Thread Starter
Administrator
Joined: Jul 2001
Posts: 24,416
From: Stuart, FL
Originally Posted by full-cruise' date='Jun 3 2004, 02:34 AM
"""I'm figuring $54.95 for a pair, you can pick out your bulbs at the local store or I can get PIAA's if you would like.
I'll also have the non-diamond back kits like you see pretty much everywhere else for $36.99.
I'll also have some 90/100w super white bulbs for $20 if you would rather get them all at once."""
not trying to bust anything up but there on ebay for $36.97 shipped with a set of lights. you should call who ever your getting them from and see if they can lower there prices to you...~~>rite here
I'll also have the non-diamond back kits like you see pretty much everywhere else for $36.99.
I'll also have some 90/100w super white bulbs for $20 if you would rather get them all at once."""
not trying to bust anything up but there on ebay for $36.97 shipped with a set of lights. you should call who ever your getting them from and see if they can lower there prices to you...~~>rite here
Senior Member
Joined: Mar 2004
Posts: 172
Is there a wiring kit with a relay for the higher wattage bulbs, or do we just toss one together? It seems like without a relay, the additional wattage may have a negative impact on the headlamp switch, which is already at it's limits in most cases.
Thread Starter
Administrator
Joined: Jul 2001
Posts: 24,416
From: Stuart, FL
I'd recommend a relay if you are going to run the high wattage bulbs. To be honest I had planned on getting one when I did mine, but I ended up just tossing them in and rolling with them, that was about a year ago LOL, I am running 80/100, but it's definetely something I would consider on anything over stock.
Senior Member
Joined: Oct 2003
Posts: 3,502
From: Canada
I ran the stock H4 bulbs for a year.. Like I was saying the only problem I had was a slightly hot harness plug but I think that was due to a bad ground.
I don't know if the regular H4s are higher wattage than DOT sealbeams.
I don't know if the regular H4s are higher wattage than DOT sealbeams.
Thread Starter
Administrator
Joined: Jul 2001
Posts: 24,416
From: Stuart, FL
Originally Posted by ColinRX7' date='Jun 3 2004, 06:40 AM
I ran the stock H4 bulbs for a year.. Like I was saying the only problem I had was a slightly hot harness plug but I think that was due to a bad ground.
I don't know if the regular H4s are higher wattage than DOT sealbeams.
I don't know if the regular H4s are higher wattage than DOT sealbeams.
Senior Member
Joined: Apr 2004
Posts: 623
From: Montreal, Quebec
Originally Posted by phinsup' date='Jun 3 2004, 05:18 AM
I'd recommend a relay if you are going to run the high wattage bulbs.
Thread Starter
Administrator
Joined: Jul 2001
Posts: 24,416
From: Stuart, FL
Originally Posted by FlukeSDS' date='Jun 3 2004, 07:51 AM
If I was to get the diamond back headlamps with a pair of the hella optilux H4s would there be any problem on a completely stock lighting system? Cause they look pretty sweet and I want em! LOL
Thread Starter
Administrator
Joined: Jul 2001
Posts: 24,416
From: Stuart, FL
**** ME! Well I called to place the first order today and they told me 8 to 12 weeks! WTF is up with that? I don't think I am going to carry those afterall, my distributor has the Hella's so those are still available, there was only one person who ordered so I'll make it up to them
I feel like an retard for getting the deal going and not asking the guy how far out they were, I just assumed the stocked the ****. Bastards.
I feel like an retard for getting the deal going and not asking the guy how far out they were, I just assumed the stocked the ****. Bastards.