NoPistons -Mazda Rx7 & Rx8 Rotary Forum

Page 1 of 6

Last »

Show 40 post(s) from this thread on one page

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)

- 2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)

- - Headlight Air Duct (https://www.nopistons.com/2nd-generation-specific-17/headlight-air-duct-23502/)

Nemesis

08-25-2003 07:14 PM

1 Attachment(s)

After about 6 moths of this thing collecting dust, I've finally installed it. It's an NAPA air duct hedlight cover I purchased from GregW on teamfc3s.org. Nicely done fibreglass, very light. Cheap too, It only cost me $50 including shipping. See link here.

It took me a couple of hours, I had to drill out the screws holding the original headlight cover on. They were covered, head to threads, in about three coats of paint.

Check out some pics...

The cover....

Nemesis

08-25-2003 07:15 PM

1 Attachment(s)

Before...

Nemesis

08-25-2003 07:15 PM

1 Attachment(s)

Plastic removed....

Nemesis

08-25-2003 07:16 PM

1 Attachment(s)

Cover removed....

Nemesis

08-25-2003 07:16 PM

1 Attachment(s)

Cutting begins....

Nemesis

08-25-2003 07:17 PM

1 Attachment(s)

Cutting finished...

Nemesis

08-25-2003 07:18 PM

1 Attachment(s)

Test fit....

Nemesis

08-25-2003 07:18 PM

Finished. View from top...

Nemesis

08-25-2003 07:19 PM

1 Attachment(s)

Finished. View from side...

Nemesis

08-25-2003 07:23 PM

1 Attachment(s)

My cutting wheel... before and after.... I really wouldn't try this with a hacksaw....

All times are GMT -5. The time now is 11:41 PM.

Page 1 of 6

Last »

Show 40 post(s) from this thread on one page