would it be possible (is the correct wiring akready in place) to put an n/a guage set in place of a t2 one? i am adding a boost guage so i don't really need the stock one. with a FCD it is useless anyway. and i might as well have an extra working guage. anyone ever tried it?

 

IF they are the same series, like s4. It will work as long as you have the harness pieces from the turbo. The little harness part from the turbo has the extra two wires to control the boost gauge. If not. U just have to swap out the voltage wires to the boost gauge plug location.

IF you are running the stock TII computer is it good to plug in the boost gauge as it will tell you if the ECU is seeing boost.



C