Greddy V-spec Fmic Install On S4 T2..
#1
Ok, so my Greddy V-spec fmic will be here next week. Can someone tell me how to install it.. WITHOUT removing or relocating anythig?? What needs to be cut, and what needs to be done.. I could move the battery to one of the rear bins, but thats about the extent of what i wanna move around.. any help is appreciated.. thanks!
#2
you gotta cut
the kit's piping was made for use with the car in all shapes...so its tailored to a stock engine...so you can infact use it with the battery there..
but you will have to cut some sheetmetal out of hte way for the piping its not too bad
the kit's piping was made for use with the car in all shapes...so its tailored to a stock engine...so you can infact use it with the battery there..
but you will have to cut some sheetmetal out of hte way for the piping its not too bad
#7
i believe you need to remove the whole front bumper and **** to install it properly and reach the places udner the headlights where you need to cut.
it is by no means a quick job. id plan a free day just to be safe and so you dont rush and **** **** up.
kevin.
it is by no means a quick job. id plan a free day just to be safe and so you dont rush and **** **** up.
kevin.
#9
Originally Posted by Benny' date='Jan 22 2004, 12:33 AM
yeah, i know the bumper needs to come off. just wondering what under the hood needs to be moved to a different location or removed altogether.
its the ultimate in tight fits.
kevin.
#10
Here is a website:
http://www.cabrio7.org/mods/ic/
You will need to modify pipe 5 going to the throttle body. It will hit the master cylinder.
http://www.cabrio7.org/mods/ic/
You will need to modify pipe 5 going to the throttle body. It will hit the master cylinder.