Getting T2 Started?
02-13-2004, 05:07 PM
#12
Member
Thread Starter
Join Date: Apr 2003
Location: Maine
Posts: 96
not to much if i put the egi fuse back in i would......i put a little more mmo in and turned it over with the fuse pulled and spark plugs out so im going to see what happens tommorow when i try to start it
02-13-2004, 05:08 PM
#13
Member
Thread Starter
Join Date: Apr 2003
Location: Maine
Posts: 96
when i took the plugs out the first time the top ones were still wet but the bottom ones werent....im pretty sure all plugs are getting spark though.....i just forgot to add this in to my last post i still need to see what happens tommorow
02-13-2004, 08:38 PM
#14
Member
Join Date: Mar 2002
Location: Windsor, Ontario, Canada
Posts: 69
BY FAR, the easiest way to get an rx7 started:
requires: 1 chain, 1 friend, 1 other vehicle.
a chain can be substitued for a piece of carpet or something if chain isn't available. (push instead of pull)
Attach other vehicle to the rx7 and go! a clean paved surface with no traffic is ideal for this..
it WILL start with spark + fuel + compression, PERIOD.
Put the car in 2nd gear and hold the clutch pedal to the floor, release it when you get going about 10MPH. Be careful not to hit the other vehicle.
holding the engine at WOT seems to help, I don't know why.
requires: 1 chain, 1 friend, 1 other vehicle.
a chain can be substitued for a piece of carpet or something if chain isn't available. (push instead of pull)
Attach other vehicle to the rx7 and go! a clean paved surface with no traffic is ideal for this..
it WILL start with spark + fuel + compression, PERIOD.
Put the car in 2nd gear and hold the clutch pedal to the floor, release it when you get going about 10MPH. Be careful not to hit the other vehicle.
holding the engine at WOT seems to help, I don't know why.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
