Gauge Cluster
10-20-2005, 08:42 PM
#8
Senior Member
Thread Starter
Join Date: Jul 2003
Posts: 1,882
Originally Posted by fc3s4utnv' post='771224' date='Oct 20 2005, 09:29 PM
Yup I did the same thing boght the surround and its been sitting by my computer for 6 months now, bc I cant get it on.
Yeah this **** sucks.I cracked the gauge clusters clear peice in half so I bought another one and now the tabs are breaking and I still can't get it off unless I break it.I turned it over and thought of a possible solution though.I'll fill you in tomorrow after work and will take pics.This should do the trick without even removing the clear peice.
- Aaron -
Lights Out
10-21-2005, 04:33 PM
#9
Senior Member
Join Date: Oct 2005
Posts: 248
you dont take the clear cover off to put the carbon fiber insert in!!!!!!! you bend the carbon fiber insert slightly, curve it like this ( and slide it into the the speedometer hole with the sticky tape just slightly peeled back and put it into place then reach in and peel the sticky off off and put it in place... it takes some fighting but thats how i did mine
10-21-2005, 04:35 PM
#10
Senior Member
Join Date: Oct 2005
Posts: 248
yeah... i tried to take the clear cover off and it just started to crack where it is stuck to the back peice so i didnt go any further... i just peeled the sticky stuff like a half an inch back on one side and bent the carbon fiber just enough to get it through the speedo hole and put it in place and peel the tape off............ thats all you gotta do