2nd Generation Specific 1986-1992 Discussion

Fuel system

Old Mar 7, 2011 | 12:26 AM
  #1  
ReD_TO4b's Avatar
Thread Starter
Member
 
Joined: Feb 2011
Posts: 51
From: Wyoming
Default

How can I tell if the previous owner put in a pump or injectors? I really don't feel like droping the tank and what not. Is there a stock psi level I can check by placing a pressure gauge in the system to tell? Wanna know what all he has done to it because to me he seemed kinda desprate to get rid of it! Maybe just because of the blown turbo. Who knows.
Old Mar 7, 2011 | 12:50 AM
  #2  
RicerJ's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 737
From: Folsom, CA
Default

You dont have to drop the tank if you want to check your pump
Old Mar 7, 2011 | 08:55 PM
  #3  
ReD_TO4b's Avatar
Thread Starter
Member
 
Joined: Feb 2011
Posts: 51
From: Wyoming
Default

Well I asumed it was in the tank.... I was lookin for pumps and most said in tank style! Ill have to take a look!
Old Mar 7, 2011 | 11:20 PM
  #4  
RicerJ's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 737
From: Folsom, CA
Default

You can get to it from inside the hatch area
Old Mar 8, 2011 | 07:27 AM
  #5  
RX7 13B 4 UR AZZ's Avatar
Senior Member
 
Joined: Feb 2003
Posts: 1,591
From: Miami, Florida
Default

Yeah inside the hatch area on the left side is an access panel with wires running through it that is where the fuel pump is. remove lid and you will see the fuel lines disconnect remove screws and "surprise" fuel pump
Old Mar 8, 2011 | 10:11 PM
  #6  
RicerJ's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 737
From: Folsom, CA
Default

^ exactly best things about imports most have that access panel lol i know s13's and s14's do due to some friends who own them
Old Mar 8, 2011 | 11:24 PM
  #7  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

I would find your local rotary shop and have them check out the car. Jumping into a car with a " big " turbo is asking for a blown engine.
Old Mar 9, 2011 | 04:48 PM
  #8  
ReD_TO4b's Avatar
Thread Starter
Member
 
Joined: Feb 2011
Posts: 51
From: Wyoming
Default

well i don't think i have a local rotary shop closest one would be 100 miles or more! and it runs like a champ just some times i have a hard time starting it when its at operating temp. have to put accel peddle to the floor to start at times. but other than that it seems to be fine to me! 9lbs of boost and runs rich. smell fuel in exhaust when hot.



how difficult is it to place a fuel pressure regulator in? and where is the best place to buy one?
Old Mar 10, 2011 | 12:09 AM
  #9  
1Revvin7's Avatar
Senior Member
 
Joined: Oct 2001
Posts: 10,906
From: Peoria, AZ
Default

Running rich at idle doesn't indicate anything about WOT. You need a wideband o2 sensor as your next modifcation. If its leaner than 11.8 under WOT then you need a retune. Chances are its way off..
Old Mar 10, 2011 | 09:44 AM
  #10  
ReD_TO4b's Avatar
Thread Starter
Member
 
Joined: Feb 2011
Posts: 51
From: Wyoming
Default

where is the best place to find a wideband? thats some what cheap. im on a budget.

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:15 AM.