NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Fuel Door Stuck (https://www.nopistons.com/2nd-generation-specific-17/fuel-door-stuck-26797/)

Seppuku 10-14-2003 10:14 AM

Anyone know how to get this thing open if the cable decides it doesnt want to help. https://www.nopistons.com/forums/pub..._DIR#>/sad.png

RX-007 10-14-2003 10:29 AM

On my FD the cable didnt break but the mechanism that holds the door closed is all kinds of messed up. Doesnt like to open 1/2 the time. Dont know if the FCs are the same as FDs but if you look inside the door, opposite of the hinge, there should be some sort of arm that holds the door closed. I just push and pull on that arm until the door pops open.

Hope that helps you some.



--Andrew

i.didnt.do.it 10-14-2003 10:48 AM

Try hitting the right side (side towards the fron of the car) with the palm of your hand. Thats what I have to do sometime cause mines startin' to get sticky. If that doesn't work, try setting a thin screwdriver on the left and pop it out.

75 Repu 10-14-2003 10:49 AM

Crow Bar.!

Seppuku 10-14-2003 11:03 AM

ive tryed proping the release open and taking a screwdriver and pulling it out but thats not working. It almost seems like the cables not hooked up.

turborotor 10-14-2003 03:30 PM

There should be an emergency cable pull out inside the car.??

Rob x-7 10-14-2003 04:14 PM

no emergency pull, try grabbing the cable itself from inside the trunk, then pulling on the door. If you grab the inside of the cable, meaning the

cable itself and not the housing, it should replease on you.



Once you get it open clean the plunger really good, sand off any rough parts of the plunger, its plastic by the way, then lube it up, if you keep it clean and lubed it will give you pain free operation.

teknics 10-14-2003 10:33 PM

my fuel door is like missing the whole opening mechanism, i have no idea where it is.

Seppuku 10-14-2003 10:44 PM


Originally Posted by Rob x-7' date='Oct 14 2003, 05:14 PM
no emergency pull, try grabbing the cable itself from inside the trunk, then pulling on the door. If you grab the inside of the cable, meaning the

cable itself and not the housing, it should replease on you.



Once you get it open clean the plunger really good, sand off any rough parts of the plunger, its plastic by the way, then lube it up, if you keep it clean and lubed it will give you pain free operation.

I got it pryed open, i was right the damn thing wasnt moving at all with the cable. While prying it open somehow the srew driver hit the plunger and pushed it back in and of course now its stuck in the open position. I guess i'll have to pull it apart and fix/clean it. figures as soon as the motor problems are fixed everything else will break. https://www.nopistons.com/forums/pub...1047683664.gif

13_b_kid 10-15-2003 01:19 AM

1 Attachment(s)
when my fuel door was acting up i took some wd-40 or any m.p.l and sprayed it on the lil plastic nipple looking thing by the fuel door and worked it in and out


All times are GMT -5. The time now is 04:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands