Fires, dies....repeat.
05-15-2007, 08:05 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Posts: 165
I guess now its my turn to have a stupid problem I can't seem to pin down. Here is the problem with some history.
Replaced the fuel pump with an FD pump, changed strainer and filter at the same time. Took of UIM to fix an OMP line that had broke. New plugs were put in. Car was running stellar.
Went to Deals Gap Rotary Rally. Beat the snot out of it. No problems.
On the last leg of the drive home, I noticed there was a slight hesitation and the car felt like it was bogging at part throttle.
Got home, took off the TMIC and UIM, noticed a bunch of cracked vacuum caps. Decided to replace all of them. Also decided that at the same time I might as well throw in some BRAND NEW injectors (I get them CHEAP).
Today after work, I put in the new injectors, all new vacuum caps, new booster line.
Crank it, catches, dies, repeat.
Jumpered the fuel pump, flowing good, can hear it splash return into the tank.
Checked the plugs, a little wet. Replaced them.
Crank, catches, dies, repeat.
Took it all back apart and did it all over again. Same result.
WTF.
Help please.
Replaced the fuel pump with an FD pump, changed strainer and filter at the same time. Took of UIM to fix an OMP line that had broke. New plugs were put in. Car was running stellar.
Went to Deals Gap Rotary Rally. Beat the snot out of it. No problems.
On the last leg of the drive home, I noticed there was a slight hesitation and the car felt like it was bogging at part throttle.
Got home, took off the TMIC and UIM, noticed a bunch of cracked vacuum caps. Decided to replace all of them. Also decided that at the same time I might as well throw in some BRAND NEW injectors (I get them CHEAP).
Today after work, I put in the new injectors, all new vacuum caps, new booster line.
Crank it, catches, dies, repeat.
Jumpered the fuel pump, flowing good, can hear it splash return into the tank.
Checked the plugs, a little wet. Replaced them.
Crank, catches, dies, repeat.
Took it all back apart and did it all over again. Same result.
WTF.
Help please.
05-15-2007, 08:06 PM
#2
Senior Member
Thread Starter
Join Date: Aug 2005
Posts: 165
Little more info.
AFM was NEVER unplugged.
But that was the first thing I checked.
I'm thinking I might have cracked the lower injector grommets when I reinstalled them. They were pretty dry and hardened.
But I don't know if that will cause this or not.
AFM was NEVER unplugged.
But that was the first thing I checked.
I'm thinking I might have cracked the lower injector grommets when I reinstalled them. They were pretty dry and hardened.
But I don't know if that will cause this or not.
05-15-2007, 08:41 PM
#4
Senior Member
Thread Starter
Join Date: Aug 2005
Posts: 165
Well I just ordered some new injector grommets just in case. The UIM gasket it spankin new, but I have never used silicone on them, I will put some Hylomar on when I put the injectors back in.
Any other insight??
Any other insight??
05-16-2007, 09:45 PM
#6
Junior Member
Join Date: Feb 2007
Posts: 18
When i put a motor in my car after it sat for 5 years (and 2years w/ no motor in it) I had a similar problem twice. The first was I forgot how/where the wires connected, It fired and was rough for about three and a half seconds. The next thing i ran into was my wire got pulled out of the connector a little so it appeared okay but it was actually about 8mm back to where it never made contact with the injector pin. Somewhere i have a post with a pic.......
05-16-2007, 10:55 PM
#7
Senior Member
Join Date: Nov 2002
Location: Cincinnati, Oh hi hoe!
Posts: 2,286
if you give it any gas can you keep it alive?
mine does that with the afm unplugged, no matter what i do.
but with big vacuum leaks and a misadjusted idle i could keep it running by giving it some gas and holding it at like 1500-2k.
mine does that with the afm unplugged, no matter what i do.
but with big vacuum leaks and a misadjusted idle i could keep it running by giving it some gas and holding it at like 1500-2k.
05-17-2007, 08:36 AM
#9
Senior Member
Join Date: Dec 2002
Location: Wayne, NJ
Posts: 4,837
any idea on your fuel pressure?
pull the fd pump and check to see if the filter sock is clogged, had that problem happen to me on my fd the other day lol, i doubt its the problem but it's worth a shot.
kevin.
pull the fd pump and check to see if the filter sock is clogged, had that problem happen to me on my fd the other day lol, i doubt its the problem but it's worth a shot.
kevin.