I know its been asked many times, but what do i need for an N/A to turbo II swap, i read the faqs and a few of the links dont work.

i have an S4 turbo II motor, trans, and wiriing harness with ecu

and the mazdatrix turbo to na driveshaft.

besides exhaust what other things do i need?

thanks

 

Boost sensor.

 

boost gauge?

 

it tells you how much boost your turbo is putting out.

 

you need a full turbo longblock, wiring harness, all sensors, ecu, fuel pump, and drivetrain if you don't want to break anything down the line. some say it's not cost effective. others say it is. i would tell you to get nitrous....

 

from what ive heard, all the drivetrain parts in an na are weaker than the t2 parts. if you already have the t2 engine and tranny, you should probably get a t2 diff and axleshafts, and you might need a t2 driveshaft too, but im not completely sure. i havent done this yet.

 

Buy a TII and pull the powertrain and related modules out and put them in the N/A.



Er wait a second. . .

 

it would be a LOT easier if you just got a t2, unless your car has some sentimental value.