Fd Twins On Fc
#13
I think Im just going to get a pre made manifold and cut off the flange that comes on it and get the shop down the rad to cut a new one with the cnc, and then bend the pipes on the manifold to fit, and weld the new flange on. I think it will work.
#14
We are starting to gear up to offer mild-steel tube turbo exhaust manifolds that you can weld on whatever flanges to suit your turbo and wastegate choices. The target price is $400 (or less), depending on what you want. It's not listed, but send hIGGI email from here...
http://rx7cz.net/shop/
-Ted
http://rx7cz.net/shop/
-Ted
#18
another option is to pick up one of the OBX manifolds cheap on Ebay, check the measurements on them, setting your turbo on top of the T4 flange to get an idea of the fit, then having the flange removed, and your correct flange put on. If you do not want to use the manifold, you can always resell it on ebay again. I picked up 2 FD OBX/SSautochrome manifolds for less than 100 each.
#20
the main difference on a FC manifold, and a FD manifold is the wastegate placement. I could ship you one and let you use it for fit if you want, see if it will work for you. then we could work something out if you want to keep it.
E-mail me (so I can keep track of what were doing) and I will let you know what we need to do. I can bring it to rotorfest if you want to save on Shipping costs.
E-mail me (so I can keep track of what were doing) and I will let you know what we need to do. I can bring it to rotorfest if you want to save on Shipping costs.