FC3S Project
#33
i started porting the wastegate, to prevent boost-creep.i dont like to start spitting out apex seals through the exhaust
short passage on the left is nearly finished, the one on the right still needs to be ported.
short passage on the left is nearly finished, the one on the right still needs to be ported.
#36
been pretty busy today en things are starting to fall into place
received some more goodies
Sard fuel pressure regulator and Greddy Radiator cap
Flex-a-lite Black Magic electric fan
some gaskets
alternator relocation bracket is finished
starting the buildup again, and mounted the following parts:
- alternator
- lower intake manifold
- turbo
- waterpump
- oil metering pump
received some more goodies
Sard fuel pressure regulator and Greddy Radiator cap
Flex-a-lite Black Magic electric fan
some gaskets
alternator relocation bracket is finished
starting the buildup again, and mounted the following parts:
- alternator
- lower intake manifold
- turbo
- waterpump
- oil metering pump
#38
started removing all emissions
mounted the turbo heat shielding
replaced the OMP lines
replaced the OMP injector hoses with silicone.
also capped off some vacuum connections. only one left is for my Sard fuel pressure regulator
mounted the turbo heat shielding
replaced the OMP lines
replaced the OMP injector hoses with silicone.
also capped off some vacuum connections. only one left is for my Sard fuel pressure regulator
#39
another update:
engine is almost ready to be put back in, only thing is, i'm still waiting for the car to be picked up to get the enginebay painted...
progress since last time:
- mounted the oil feed line
- mounted injectors and fuel rails
- fuel lines
- alle emissions removed
- hooked up the wiring loom, with some minor adjustments
- did the throttle body modification
also some new stuff on the way:
ACT extreme-street clutch
Front mount intercooler
engine is almost ready to be put back in, only thing is, i'm still waiting for the car to be picked up to get the enginebay painted...
progress since last time:
- mounted the oil feed line
- mounted injectors and fuel rails
- fuel lines
- alle emissions removed
- hooked up the wiring loom, with some minor adjustments
- did the throttle body modification
also some new stuff on the way:
ACT extreme-street clutch
Front mount intercooler