1Revvin7

should i drop it in w/ the motor mounts on the engine or bolted to the frame(whatever its called)?

13BAce

Do it with the mounts bolted to the engine.

1Revvin7

thxs for poking your head in :bigthumg:

pengaru

I removed mine with the mounts in the car, I will probably install that way too... 13Bace, whats the reason for doing it with mounts on the motor?

Turbo II

:bigthumg:

j9fd3s

i like to leave the drivers side mounts loose, that way you can move 'em around until it goes in the hole



mike

RotaryRocket219

the drivers sound mount is a pain in the *** to get it. The passenger side goes in no problem.but man the drivers side is hell! :rant:



i tried several different ways, putting motor in with driver side moutn off, loose, etc. You just have to give it hell and keep at it and it'll eventually be a good motor mount and go in!! hehe



have fun lining the trans up with motor too (unless you pulled them together) that was great to!

MAZDAROTARYPOWER

install the engine with the mounts on and also jack the trans up a little so you can mate the with the trans easily!

BigTurbo74

he already connected the tranny to the engine...make a difference?

j9fd3s

on the 20b i left the mounts on the car, it was ok, i think i had to loosen one of them



mike