Droppin Exsaust
12-14-2004, 04:39 PM
#13
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Creighton Nebraska
Posts: 772
Originally Posted by Rob x-7' date='Dec 14 2004, 02:37 PM
what would you suggest to cut them off? i dont have anything i can think of that would do it in that small space
12-14-2004, 04:39 PM
#14
Junior Member
Join Date: Jun 2003
Posts: 7
dude, you're gonna have to buy a mini-torch from Home Depot or something and burn that bitch off. You'll also need to buy a mini-welding kit to get it back on. Either that, or just find some way to hold them in place temporarily so that you can drive your car to the nearest muffler shop. They shouldn't charge you more than $20-30 to get them welded back on.
12-14-2004, 05:22 PM
#17
Super Moderator
Join Date: Feb 2002
Location: Amityville, New York
Posts: 12,288
how about you get a picture so we know what it is your talking about
those arent stock so who knows what someone bolted up there
you can dick around with some rusty old bolts that you cant get to or you can
cut them off- saws all might work, cut off wheel on a dremel might even work
if no torch is handy
with no pic its hard to say
those arent stock so who knows what someone bolted up there
you can dick around with some rusty old bolts that you cant get to or you can
cut them off- saws all might work, cut off wheel on a dremel might even work
if no torch is handy
with no pic its hard to say
12-14-2004, 06:46 PM
#18
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Creighton Nebraska
Posts: 772
i'll get a picture in the morning or later tonight if i can, it's hard to see because it's inbetween what looks like the gas tank, the wheel well, and the heat shield for the muffler, so it's really hard to get to, im just gonna goto sears tomorrow i think and charge either a dremel tool like you say or a mini torch like mentioned earlier
12-14-2004, 08:51 PM
#20
Senior Member
Join Date: Oct 2001
Location: Marysville WA.
Posts: 1,847
Does it look like "N" or "O" in the picture?
If so you could probably work them off by unbolting the rest of the exhaust and then going at it. I would just try and unbolt them though, spray some PB blaster on the bolts.
If so you could probably work them off by unbolting the rest of the exhaust and then going at it. I would just try and unbolt them though, spray some PB blaster on the bolts.