NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   cutting out at 4k (https://www.nopistons.com/2nd-generation-specific-17/cutting-out-4k-65144/)

Leetheslacker 04-09-2007 09:36 PM

okay what the ****



tried my NA ecu for shits and giggles



same



damn



thing.



cuts out like a fuel cut, wideband goes lean.



so, injectors are good, wiring is good, ecu is good. WTF.



what in the world could possibly cause my injectors to just not come on? afm? some other sensor? waht else has control over the secondaries coming on?



if it was an ignition problem, like bad plugs or misfiring or soemthing, the wideband wouldnt show lean would it?

Leetheslacker 04-09-2007 10:24 PM

tomorrow im switching the primaries and the secondaries around.



i really doubt itll do anything. unless somehow my 550 secondaries and the 720s i have are both fucked up.



but if it doesnt run, problem solved, secondaries are shitty.



if it still does the same thing, im going to shoot myself.



there HAS to be something im missing thats crucial for the secondaries to come on

j9fd3s 04-10-2007 10:00 AM

this is a real long shot, but seths s5 did the same thing, plugging in the fuel pressure solenoid fixed it. only needs to be hooked up electrically

Leetheslacker 04-10-2007 12:34 PM


Originally Posted by j9fd3s' post='867505' date='Apr 10 2007, 11:00 AM

this is a real long shot, but seths s5 did the same thing, plugging in the fuel pressure solenoid fixed it. only needs to be hooked up electrically



which one of those thingamajigs is it?

Leetheslacker 04-13-2007 04:11 PM

grounded the **** out of everything. ran a ground from the battery - to one of the ecu bolts, then from there to the harness ground on the motor, then from there to the stock - battery cable. still cuts out.



im stumped.



boost sensor reads about 3.2v at 8psi



i guess ill switch the primaries and secondaries around, although i doubt there bad as ive tried two sets of secondaries.



if i downshift at 40 into second and put the car around 4k, and accelerate VERY lightly i can make it past the cut. but any more throttle then it takes to barely accelerate and the wideband goes way lean, like 15-16afr.



an ignition problem like bad plugs or a misfire or something wouldnt cause a lean condition? im stumped so i figure id ask about anything else that might be causing it.



car ran fine on the same harness when it was na, no problems at all. so the harness should be good..

Leetheslacker 04-15-2007 06:03 PM

j9 where are youuuu



im stumped

dac 04-15-2007 07:02 PM


Originally Posted by Leetheslacker' post='867359' date='Apr 9 2007, 07:38 PM

fucked with the tps randomly



cuts at 4.5k now.



https://www.nopistons.com/forums/pub..._DIR#>/dry.gif



so, tps being off doesnt make it cut, i dont think. ill multimeter it and find out





I had a bad set of secondary's and this is EXACTLY what it did. Under light throttle is was okay... but hit the gas and it cut out bad. Quick tip would be to swap the injectors around.

j9fd3s 04-16-2007 10:23 PM


Originally Posted by Leetheslacker' post='868276' date='Apr 15 2007, 04:03 PM

j9 where are youuuu



im stumped



i went to the mountain and asked node, he didnt know either

Leetheslacker 04-17-2007 10:13 PM


Originally Posted by j9fd3s' post='868483' date='Apr 16 2007, 11:23 PM

i went to the mountain and asked node, he didnt know either



nobody knows wtf it is.



im stumped.

Leetheslacker 04-18-2007 02:06 PM

tried na afm, no dice


All times are GMT -5. The time now is 01:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands