Hey whats up everyone!

Just looking for the best deal on a Clutch Slave Cylinder and Braid Cable.

Clutch sticks to the floor periodically .

Checked it outt, didnt see any leaks , but does seem to be normal wear and tear issue .

Just looking for best buy !

Thanks !

 

flush system with some auto tranny fluid and see if it doesn't stop sticking before you go to buy a new one man

 

I agree with Mr. Poorguy, it couldn't hurt to try bleeding it first.



If you need a new one though, Mazdatrix sells one with braided lines for less than the OEM non-braided unit.

 

i didn't realize this was the second gen area, do they have the clutch master cylander seperate from the brake master cylander like an fb? if so, bleeding the clutch lines are cake

 

Yeah, they're separate. Brake MC, clutch MC, clutch slave. I might be wrong, but I think that you can't bleed the clutch MC. But the slave and the bleed nipple is easy to get to, right on top of the tranny.

 

you'd have to crack the line underneath the mc to drain it out, clean the bowl with some brake cleaner on a rag, then flush it with atf. then drain and bleed the system with dot 3 once the color of the fluid coming from the bleeder is red again lol