NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   2nd Generation Specific (https://www.nopistons.com/2nd-generation-specific-17/)
-   -   Bnr Turbo Upgrade (https://www.nopistons.com/2nd-generation-specific-17/bnr-turbo-upgrade-17649/)

ECKO1980 05-21-2003 01:20 PM

I drive a S4 with S/P motor, fuel upgrades(FCON), full exhaust and intake. I want to send my turbo off to get a BNR up grade im thinking a stage 3. does any one have any experience with this? What all should I have done to it I know that there are a few options. Any problems I will run into? just any info would be appreciated pros, cons good or bad experiences. THanks

Geoffman72 05-21-2003 01:28 PM

Personally I wouldnt get the 87-88 turbo upgraded as its wastegate would require a lot of modification to flow well enough for a hybrid.



You should be able to pick up an 89-91 turbo and manifold that needs rebuilding for $100-$200.

j9fd3s 05-21-2003 01:47 PM

yes do an s5 turbo. i have a hybrid s5 turbo its great



mike

Blink 05-21-2003 01:55 PM

I have a BNR stage 3 in my well on the work bench next to my Rx-7 at the moment https://www.nopistons.com/forums/pub...DIR#>/wink.png

Jerk_Racer 05-21-2003 03:19 PM

Yes, by all means score a kouki manifold and turbo. I picked up a spare turbo just to do this. The Stage 2 I have from BNR is practically a Stage 3. Anyway, I was able to put down some healthy numbers when I went to the dyno. https://www.nopistons.com/forums/pub...#>/biggrin.png

vosko 05-21-2003 03:29 PM

i had a S5 with a t04e compressor.......that thing MOVED https://www.nopistons.com/forums/pub...IR#>/bigok.gif

ECKO1980 05-22-2003 03:31 AM


Originally Posted by Jerk_Racer' date='May 21 2003, 12:19 PM
Yes, by all means score a kouki manifold and turbo. I picked up a spare turbo just to do this. The Stage 2 I have from BNR is practically a Stage 3. Anyway, I was able to put down some healthy numbers when I went to the dyno. https://www.nopistons.com/forums/pub...#>/biggrin.png

What if I did it to a S4 and just ported the **** out of the wastegate and welded a new flapper door on?? Also why is stage 2 and 3 the same price? When I talk to the guy at RX7store or what ever he sounds like he dosent know **** about them. Just tells me to send in the turbo with a sheet of paper of what I want but its hard to figure out what I want when no one can answer questions! https://www.nopistons.com/forums/pub...IR#>/angry.png Is there a phone # I can call to get ahold of the gu that actually does this so I can get a little help and figure out a price???

ECKO1980 05-22-2003 03:32 AM

Neone wanna sell me a S5 turbo for cheepish so I can use it?? lol

Geoffman72 05-22-2003 10:42 AM


Originally Posted by ECKO1980' date='May 22 2003, 03:31 AM
What if I did it to a S4 and just ported the **** out of the wastegate and welded a new flapper door on?? Also why is stage 2 and 3 the same price? When I talk to the guy at RX7store or what ever he sounds like he dosent know **** about them. Just tells me to send in the turbo with a sheet of paper of what I want but its hard to figure out what I want when no one can answer questions! https://www.nopistons.com/forums/pub...IR#>/angry.png Is there a phone # I can call to get ahold of the gu that actually does this so I can get a little help and figure out a price???

umm, I would strongly suggest going directly through BNR if possible. Even if RX-7store.net wasnt shady its a good idea to cut out the middle man.

SPOautos 05-22-2003 10:43 AM

205-663-4797 that is the phone number to BNR. Give them a call, Brian is the owner



STEPHEN


All times are GMT -5. The time now is 09:47 PM.


© 2024 MH Sub I, LLC dba Internet Brands