Blew my first motor
#21
Im planning on basically replacing everything with RA over haul kit gonna upgrade apex seals and springs too. Also planning on doing thermal pellet mod, and modifing the oil pressure regulators
I am gonna by the stand adaptor. Itll make my life easier.
It also looks like ill be purchasing a flywheel stopper cause this front balancer bolt wont come out. Ive tried 2 1/2" guns and 2 3/4' guns. This thing wont budge ive been at it since 11 o clock. Im getting upset any advice?
As for the tools I have every thing availible to me so that wont cost me anything. Just need to know what to grab
__________________
I am gonna by the stand adaptor. Itll make my life easier.
It also looks like ill be purchasing a flywheel stopper cause this front balancer bolt wont come out. Ive tried 2 1/2" guns and 2 3/4' guns. This thing wont budge ive been at it since 11 o clock. Im getting upset any advice?
As for the tools I have every thing availible to me so that wont cost me anything. Just need to know what to grab
__________________
#22
Im planning on basically replacing everything with RA over haul kit gonna upgrade apex seals and springs too. Also planning on doing thermal pellet mod, and modifing the oil pressure regulators
I am gonna by the stand adaptor. Itll make my life easier.
It also looks like ill be purchasing a flywheel stopper cause this front balancer bolt wont come out. Ive tried 2 1/2" guns and 2 3/4' guns. This thing wont budge ive been at it since 11 o clock. Im getting upset any advice?
As for the tools I have every thing availible to me so that wont cost me anything. Just need to know what to grab
__________________
I am gonna by the stand adaptor. Itll make my life easier.
It also looks like ill be purchasing a flywheel stopper cause this front balancer bolt wont come out. Ive tried 2 1/2" guns and 2 3/4' guns. This thing wont budge ive been at it since 11 o clock. Im getting upset any advice?
As for the tools I have every thing availible to me so that wont cost me anything. Just need to know what to grab
__________________
Once you get the flywheel stopper you will be golden. You just need a few 1/2 braker bars and a breaker bar, good friend to hold the engine. The bolt and nut can be a PITA sometimes but one way or another it will come off.
#24
my future purchase list
Pineapple Racing
Pilot Bearing & Seal
Item Number: PLTBRG/S $12.50
* whole number $12.50
Rotor Housing Coolant Passage Plug
Item Number: EP20S $6.95
* whole number $6.95
Stainless Steel Crank Angle Sensor Cover - Ninja
Item Number: CASC-SN $14.95
* whole number $14.95
FC Aluminum Oil Pan
Item Number: FCAS $249.00
* whole number $249.00
Shims for front cover pressure regulator
Item Number: PRSSHIMS $2.95
* whole number $2.95
Mazda Seal Case
Item Number: SEALCS $69.00
* whole number $69.00
TOTAL $355.35
Pineapple Racing
Pilot Bearing & Seal
Item Number: PLTBRG/S $12.50
* whole number $12.50
Rotor Housing Coolant Passage Plug
Item Number: EP20S $6.95
* whole number $6.95
Stainless Steel Crank Angle Sensor Cover - Ninja
Item Number: CASC-SN $14.95
* whole number $14.95
FC Aluminum Oil Pan
Item Number: FCAS $249.00
* whole number $249.00
Shims for front cover pressure regulator
Item Number: PRSSHIMS $2.95
* whole number $2.95
Mazda Seal Case
Item Number: SEALCS $69.00
* whole number $69.00
TOTAL $355.35
#25
Rotary Aviation
Description Price Quantity Amount
Thermal Pellet - US
8.50 quantity|
Super Seal UPGRADE - US/Canada
60.00 quantity|
87-88 TURBO Install Gaskets - US/Canada
118.80 quantity|
2 mm RA Racing Spring Set 2 Rotor - US
80.50 quantity|
86-91 BASIC Overhaul Kit-US ONLY
541.00 quantity|
Item total:$808.80
add 98 for OMP adaptor
Description Price Quantity Amount
Thermal Pellet - US
8.50 quantity|
Super Seal UPGRADE - US/Canada
60.00 quantity|
87-88 TURBO Install Gaskets - US/Canada
118.80 quantity|
2 mm RA Racing Spring Set 2 Rotor - US
80.50 quantity|
86-91 BASIC Overhaul Kit-US ONLY
541.00 quantity|
Item total:$808.80
add 98 for OMP adaptor
#26
I am planning on having all my Injectors cleaned and flow tested, I am also thinking of purchasing a new FPR and sumping the tank and moving the pump in there will just have to change my lines around a little.
So im unsure whether im gonna go with the full kit of basic kit I guess i have to wait till Get every thing out and start measuring. Im gonna buy a seal box from pineapple to keep every thing organized
James
So im unsure whether im gonna go with the full kit of basic kit I guess i have to wait till Get every thing out and start measuring. Im gonna buy a seal box from pineapple to keep every thing organized
James
#27
Since you'll have the engine out you may want to get a pan brace and replace the motor mounts. I got both at banzai-racing.com. The pan brace goes all around the bottom of the oil pan to help prevent the housings from twisting apart in higher power builds.