Another jspec bites the dust
Senior Member
Joined: Nov 2001
Posts: 7,316
From: Bay Area, CA
Originally Posted by pengaru' date='Aug 14 2002, 06:15 AM
I dunno, it can take alot longer if you don't have the right tools on hand. Flywheel puller, 54mm socket, large breaker bar/pipe (or impact gun) are some that come to mind. Engine stand adapter...
Senior Member
Joined: Apr 2002
Posts: 2,930
From: IL
Originally Posted by 13BAce' date='Aug 14 2002, 10:20 PM
[quote name='pengaru' date='Aug 14 2002, 06:15 AM']I dunno, it can take alot longer if you don't have the right tools on hand. Flywheel puller, 54mm socket, large breaker bar/pipe (or impact gun) are some that come to mind. Engine stand adapter...
It's a 54mm nut. 2.125 Inches = 53.975 Millimeters
Senior Member
Joined: Nov 2001
Posts: 7,316
From: Bay Area, CA
Originally Posted by pengaru' date='Aug 14 2002, 04:05 PM
[quote name='13BAce' date='Aug 14 2002, 10:20 PM'][quote name='pengaru' date='Aug 14 2002, 06:15 AM']I dunno, it can take alot longer if you don't have the right tools on hand. Flywheel puller, 54mm socket, large breaker bar/pipe (or impact gun) are some that come to mind. Engine stand adapter...
It's a 54mm nut. 2.125 Inches = 53.975 Millimeters[/quote]
Ok, I was just going by the 25 mm per inch rule. :unsure:
Senior Member
Joined: Apr 2002
Posts: 2,930
From: IL
Originally Posted by 13BAce' date='Aug 15 2002, 01:34 AM
[quote name='pengaru' date='Aug 14 2002, 04:05 PM'][quote name='13BAce' date='Aug 14 2002, 10:20 PM'][quote name='pengaru' date='Aug 14 2002, 06:15 AM']I dunno, it can take alot longer if you don't have the right tools on hand. Flywheel puller, 54mm socket, large breaker bar/pipe (or impact gun) are some that come to mind. Engine stand adapter...
It's a 54mm nut. 2.125 Inches = 53.975 Millimeters[/quote]
Ok, I was just going by the 25 mm per inch rule. :unsure:[/quote]
http://www.onlineconversion.com
B)
Senior Member
Joined: Nov 2001
Posts: 7,316
From: Bay Area, CA
Originally Posted by pengaru' date='Aug 14 2002, 05:43 PM
[quote name='13BAce' date='Aug 15 2002, 01:34 AM'][quote name='pengaru' date='Aug 14 2002, 04:05 PM'][quote name='13BAce' date='Aug 14 2002, 10:20 PM'][quote name='pengaru' date='Aug 14 2002, 06:15 AM']I dunno, it can take alot longer if you don't have the right tools on hand. Flywheel puller, 54mm socket, large breaker bar/pipe (or impact gun) are some that come to mind. Engine stand adapter...
It's a 54mm nut. 2.125 Inches = 53.975 Millimeters[/quote]
Ok, I was just going by the 25 mm per inch rule. :unsure:[/quote]
http://www.onlineconversion.com
B)[/quote]
I usually use the online converters, but I was too lazy to check my "work."
Senior Member
Joined: Apr 2002
Posts: 2,930
From: IL
Originally Posted by 13BAce' date='Aug 15 2002, 02:21 AM
[quote name='pengaru' date='Aug 14 2002, 05:43 PM'][quote name='13BAce' date='Aug 15 2002, 01:34 AM'][quote name='pengaru' date='Aug 14 2002, 04:05 PM'][quote name='13BAce' date='Aug 14 2002, 10:20 PM'][quote name='pengaru' date='Aug 14 2002, 06:15 AM']I dunno, it can take alot longer if you don't have the right tools on hand. Flywheel puller, 54mm socket, large breaker bar/pipe (or impact gun) are some that come to mind. Engine stand adapter...
It's a 54mm nut. 2.125 Inches = 53.975 Millimeters[/quote]
Ok, I was just going by the 25 mm per inch rule. :unsure:[/quote]
http://www.onlineconversion.com
B)[/quote]
I usually use the online converters, but I was too lazy to check my "work."
25mm/inch may work for smaller sizes, but at a certain point the error in the precision accumulates to significant amounts
Senior Member
Joined: Nov 2001
Posts: 7,316
From: Bay Area, CA
Originally Posted by Felix Wankel' date='Aug 14 2002, 07:24 PM
My flywheel puller is a large hammer.
