88TII fuel injector ?s
#1
OK i need to get this straight. Are the 88TII fuel injectors high, Or low Impedance??? Also what should my ohm meter read across the two terminals. I know that the 88 TII fuel injectors are the odd ball injectors limited to only that year and model. I just need to get this straight. And if i have an injector that reads 2.7 Ohms what resistor do i need to take it up to a 12-16 ohm injector ?
Thanks for your help in this confusing subject
Thanks for your help in this confusing subject
#2
88 t2 should be high impedance. HOWEVER all the new harnesses are low impedance.
high impedance injectors should be 12-15 ohms across the 2 pins
low impedance injectors should be 2-5 ohms.
if you have low impedance injectors, and want to add the resistor, its simple.
2ohm injector + 10 ohm resistor = 12 ohms resistance
high impedance injectors should be 12-15 ohms across the 2 pins
low impedance injectors should be 2-5 ohms.
if you have low impedance injectors, and want to add the resistor, its simple.
2ohm injector + 10 ohm resistor = 12 ohms resistance
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)