i'm just pondering about putting a 20B in my TII with a haltech e11 or tec III. what does everyone think https://www.nopistons.com/forums/pub...1047683785.gif

Did you get a new platinum card?

i think you are so full of **** it comes out your ears https://www.nopistons.com/forums/pub...#>/biggrin.png

i'll take that as a compliment https://www.nopistons.com/forums/pub...>/rolleyes.gif

LMFAO!!! https://www.nopistons.com/forums/pub...1047683785.gif

i got titanium screw platinum!

LMFAO!!! https://www.nopistons.com/forums/pub...1047683785.gif[/quote]

****, the bank must looove you https://www.nopistons.com/forums/pub...1047683785.gif

you might as well put one in the FD too!

i think you are crazy. isnt the fd fast enough? when you do, do it though we already know how https://www.nopistons.com/forums/pub...#>/biggrin.png so it should be super easy



mike

i figure it should cost around $10k. in reality car would take 6months to a year to fix and build. i want my TII to be my race car. my FD i guess will be daily driver. i'll have to drive it at 5psi https://www.nopistons.com/forums/pub...>/rolleyes.gif

10k and 6 months is no problem at all. the biggest part of the swap money wise is the motor itself (40%), and time wise its stupid little things like exhaust flanges.



mike

Vosco gives his time frame in dog years, so this will actually take him 3.5 years to do. https://www.nopistons.com/forums/pub...#>/biggrin.png

now to find $10k https://www.nopistons.com/forums/pub...#>/biggrin.png

I thought about doing that, and putting the TII engine in my 1st gen. https://www.nopistons.com/forums/pub...IR#>/smile.png

Maybe I will when i get back from alaska...

im in alaska too! i hav a '87 n/a and found a 20b that is a drop in for $4000 minus a computer. i also will need a tranny too. if anyone has info on both please help!

Vosko you need to keep taking your meds bro, or you'll keep thinking of stuff like this



https://www.nopistons.com/forums/pub...#>/biggrin.png

red pill, blue pill, green pill https://www.nopistons.com/forums/pub...>/rolleyes.gif

i wonder if u did do that how long it would take for u to kill it?

this is me we are talking about. king rx7 destroyer. i'd say a few weeks :P

this is me we are talking about. king rx7 destroyer. i'd say a few weeks :P[/quote]

how many j spec's is that again?



mike

this is me we are talking about. king rx7 destroyer. i'd say a few weeks :P[/quote]

how many j spec's is that again?



mike[/quote]

two pre-broken jspecs

this is me we are talking about. king rx7 destroyer. i'd say a few weeks :P[/quote]

how many j spec's is that again?



mike[/quote]

two pre-broken jspecs[/quote]

dont forget the 20b's are jspecs too....



mike

this is me we are talking about. king rx7 destroyer. i'd say a few weeks :P[/quote]

how many j spec's is that again?



mike[/quote]

two pre-broken jspecs[/quote]

dont forget the 20b's are jspecs too....



mike[/quote]

i know but they come from automatic cosmo's. so hopefully not as abused as TII's.............

this is me we are talking about. king rx7 destroyer. i'd say a few weeks :P[/quote]

how many j spec's is that again?



mike[/quote]

two pre-broken jspecs[/quote]

dont forget the 20b's are jspecs too....



mike[/quote]

i know but they come from automatic cosmo's. so hopefully not as abused as TII's.............[/quote]

yah, mine wasn't beat on, but it wasn't maintained either.

you could just buy a new one, they are only $7500 cheap at half the price.

the intakes are only $500 total though



mike

7500 cheap?lol i need a better job https://www.nopistons.com/forums/pub...1047683785.gif

its vosko cheap

vosko got a **** load of credit, thats y he has two 7's

credit doesn't buy cars.... you need $$$$ to buy cars :(

ok, im guessing the e11 or tec III are made to handle 3 rotors.

how would one go about ignition??

does anyone have a ny spec on the engine, size, weight, etc.?

thanks

the tec III comes with its own ignition

You can use Paypal. https://www.nopistons.com/forums/pub...>/rolleyes.gif

3 rotor ignition??

You can use Paypal. https://www.nopistons.com/forums/pub...>/rolleyes.gif[/quote]

that's a good idea https://www.nopistons.com/forums/pub...1047683785.gif

3 rotor ignition??[/quote]

its an option



http://www.electromotive-inc.com/products/tec3.html



go there for info

the 20b is basically 3 13b rotors together. so its 654cc x 3 = 1962cc's.

they came stock with twin sequential turbos, like the fd.

stock the engines were rated at 297hp and 280? lbs/ft.

its came in the jc cosmo, www.dmrh.net



mike

thanks, but i was looking at making a sorta dummy and see if itll be a pain to stick in a SA. Im pretty sure by the time my current rebuild expires(hoping for at least 2 years), ill have saved up enough for something stoopid like that. https://www.nopistons.com/forums/pub...IR#>/smile.png

plus there are too many ppl with daily TII SAs.

is your gsl-se back running ?

is your gsl-se back running ?[/quote]

nah, im having side seal problems. i think the engine sat too long and they seized. waiting on a friend to use his rotors and side seals. After that its a matter of putting it together. it should be ready to get spanked by NA 6 cylinder supras.

can a 20b accept superchargers? Yes, I have seen pics of a three turbo 20b, but was wondering about superchargers???

the bank sends vosko christmas cards

you could but why bother a 20B has tons of torque even turbo charged https://www.nopistons.com/forums/pub...#>/biggrin.png