I got these 1600cc injectors fromgoogle.com and they don't fit in the stock TII secondary rail. Im not going to be using a 13BT im going 13B-RE and what i wanted to know if these injectors will fit the 13B-RE secondary injector rail. I got the Bosch 1600cc for secondaries and the Nippon Denso 720cc for primaries. I was told that this will be more than enough fuel for my 400rwhp target. But im not sure if these injectors can be used with the 13B-RE?

 

theyre probly american style injectors you need japaneses ones to fit our cars unless you buy kg rails

 

You can borrow one of the fuel rails from the Space Shuttle for those bad boys...

 

You can bore the stock fuel rail to accept the 1600cc's injectors. I do that, but I have not installed yet in my car.

 

i been told Marren are a direct drop in, i also need drop in 1600's



i bought the Bosch 1600's from rx7.com. didnt fit either...heres a link i was given



http://injector.com/specs/051600PI.pdf



http://injector.com/fuelinjectors.ph...fa31db39c10a97

 

I reamed my fuel rail to accept the 1600cc injectors.