Pic's Of My New Car And **** Lying Around The Shop
Senior Member
Joined: Jan 2003
Posts: 8,079
From: union, new jersey
[quote name='Dragon' date='Apr 28 2005, 09:35 AM']Update... 
I welded in some door bars and a cross bar at the bottom of the hoop and welded it to the tranny tunnel... should stiffen things up a little more and give me a nice handle when I need to roll out of the bucket seats. Car went in to the body shop next to our shop today... The car is going to be 4" wider in the rear and 2 1/2" wider in the front. I also have the GT2000 bumper in the mail shortly from RotoryExtreme and threw a Border Racing hood on it. It's getting painted inside and out along with the engine compartment. While it's in for a face lift I'll be redoing the dash and once I get the car back I'll fix the wiring nightmare I found under the dash when I took it all out... The FRP fenders weigh about 1/2 of what the stock ones weighed and the flush mt headlights should weigh considerably less than the bowling ball weight pop up lights. The hood also weighed quite a bit less than the one I took off. All in all I'd guess I dropped about 20-30 lbs off the front end of the car, most of it in front of the tires. Damn I want to drive this thing, but I'm going to wait until I get it all put together before I go out and play...
[/quote]
thats pretty good progress for less than a week
I welded in some door bars and a cross bar at the bottom of the hoop and welded it to the tranny tunnel... should stiffen things up a little more and give me a nice handle when I need to roll out of the bucket seats. Car went in to the body shop next to our shop today... The car is going to be 4" wider in the rear and 2 1/2" wider in the front. I also have the GT2000 bumper in the mail shortly from RotoryExtreme and threw a Border Racing hood on it. It's getting painted inside and out along with the engine compartment. While it's in for a face lift I'll be redoing the dash and once I get the car back I'll fix the wiring nightmare I found under the dash when I took it all out... The FRP fenders weigh about 1/2 of what the stock ones weighed and the flush mt headlights should weigh considerably less than the bowling ball weight pop up lights. The hood also weighed quite a bit less than the one I took off. All in all I'd guess I dropped about 20-30 lbs off the front end of the car, most of it in front of the tires. Damn I want to drive this thing, but I'm going to wait until I get it all put together before I go out and play...
[snapback]705640[/snapback]
[/quote]
thats pretty good progress for less than a week
Thread Starter
Senior Member
Joined: Sep 2002
Posts: 2,550
[quote name='teknics' date='Apr 29 2005, 03:36 PM']Also by GT2000 bumper do you mean the RE-Amemiya replica FC2000 bumper?
[/quote]
Yes on the bumper question and currently No on the 95mm tb... I'm still debating aobut exacly what I'm going to sell off the yellow car...
[snapback]706314[/snapback]
[/quote]
Yes on the bumper question and currently No on the 95mm tb... I'm still debating aobut exacly what I'm going to sell off the yellow car...
Senior Member
Joined: Aug 2002
Posts: 502
[quote name='Dragon' date='Apr 29 2005, 05:08 PM']Yes on the bumper question and currently No on the 95mm tb... I'm still debating aobut exacly what I'm going to sell off the yellow car...
[/quote]
What rpm does it idle at?
[snapback]706341[/snapback]
[/quote]
What rpm does it idle at?
Senior Member
Joined: Oct 2002
Posts: 514
From: Okinawa, Japan
[quote name='Dragon' date='Apr 29 2005, 05:08 PM']I'm still debating aobut exacly what I'm going to sell off the yellow car...
[/quote]
Dont know why your debating.. you know im just going to take everything I can..
[snapback]706341[/snapback]
[/quote]
Dont know why your debating.. you know im just going to take everything I can..
