http://www.pbase.com/meanrex/dragons_pport_20b_fc
my new project... I'm going N/A 20B FC and tearing down the FD and parting it out (most of the parts are already sold) For those of you that ask why? I work on everyone elses FD's all the time and it's all becoming boring. This makes working on my FD bla... SO, I'm going to change it up and start playing with N/A 20B's for a while in a FC and see what I can make them do... https://www.nopistons.com/forums/pub...1047683473.gif I'll post more later and I have a couple of vid's of the P-Port running but I'll get some better ones later on... |
BOOOOOOOOOOOOOOOOOO
SLOW! |
|
what kinda power does a p port 20b make?
after seeing the pics, i like that hood but it seems like it would rob the air that would help cool your motor. arent these things designed to route the air down through the tranny tunnel?? if so, the hood is also robbing air from the tranny |
What's the throttle body arrangement? Details!! They look a little bit like the Porsche setup from TWM.
Funny how many people are dropping the turbo for NA motors these days! |
[quote name='TYSON' date='Apr 23 2005, 06:12 AM']What's the throttle body arrangement? Details!! They look a little bit like the Porsche setup from TWM.
Funny how many people are dropping the turbo for NA motors these days! [snapback]703652[/snapback] [/quote] yea they are Porsche somthings.. not sure of the exact model or make... I have yet to dig all the way in to the car, but JerkRacer found an artical on the car from 5 years ago when it was built by Revolution in mainland Japan... She's got some nice toys in her, but I'll wait till I find the rest before I post anything. I will be completly redoing this car and I'm going to put togeher a side ported motor with individual tb's as well so I can actually drive it on the street with out going to jail then swap in the Peri for the drags... |
[quote name='Dragon' date='Apr 23 2005, 11:31 AM']yea they are Porsche somthings.. not sure of the exact model or make... I have yet to dig all the way in to the car, but JerkRacer found an artical on the car from 5 years ago when it was built by Revolution in mainland Japan... She's got some nice toys in her, but I'll wait till I find the rest before I post anything. I will be completly redoing this car and I'm going to put togeher a side ported motor with individual tb's as well so I can actually drive it on the street with out going to jail then swap in the Peri for the drags...
[snapback]703665[/snapback] [/quote] kahren has an option video with tsuchiya beating this thing like a redheaded step child https://www.nopistons.com/forums/pub...IR#>/bigok.gif |
keep us updated like your 20b fd project https://www.nopistons.com/forums/pub...IR#>/smile.png
|
whats the projected HP from it supposed to be?
|
[quote name='GreyGT-C' date='Apr 23 2005, 12:38 PM']whats the projected HP from it supposed to be?
[snapback]703726[/snapback] [/quote] Magazine said 470 hp under 1 ton and it said that there is a 5.1 final gear in the rear, cross mission, Ohlins shocks, frp hatch with lexan window, lexan side windows, motec m4, GTR fuel pumps, Roll bar, engine is set back 6-7 inches and then of course the P-Ported 20B anr ORC clutch. |
impressive
|
dragon do you want me to host those videos?
|
[quote name='vosko' date='Apr 23 2005, 06:40 PM']dragon do you want me to host those videos?
[snapback]703814[/snapback] [/quote] I do . . . . https://www.nopistons.com/forums/pub...1047683329.gif |
sure... those arn't that good, but throw them up and I'll get some more for you later on...
|
|
sounds great, and looks great also. good luck.
|
i am lookign for a 20b to to sideport also, to put in my NA. damn you dragon, give me that car. where did all the 20Bs go in teh US! when i need one noone has one! ugh :(
|
dam thats mean!
|
|
That video is pretty crappy. I should know I took it.
|
Awesome! Looks good. Sounds better. https://www.nopistons.com/forums/pub...DIR
|
[quote name='IGY' date='Apr 27 2005, 10:54 PM']That video is pretty crappy. I should know I took it.
[snapback]705484[/snapback] [/quote] WTF why didn't you rev it when you were behind it.........or atleast do a burnout or something https://www.nopistons.com/forums/pub...1047683358.gif |
[quote name='vosko' date='Apr 28 2005, 03:06 PM']WTF why didn't you rev it when you were behind it.........or atleast do a burnout or something https://www.nopistons.com/forums/pub...1047683358.gif
[snapback]705566[/snapback] [/quote] Because the police station right across the street had it's doors open and we were already getting looks! |
Driving video?
|
we have a winner!
kahren, is there anyway you could rip that video of that car? |
Earlier this week I was standing about 20' or so back from the exhaust and could feel a very strong breeze from it when it was revved. The exhaust pulses are VERY strong. And does it like to rev. Whipcrack quick throttle response is one way to describe it. This bitch is LOUD! But in a good way. It sounds sooooo much better than a peripheral ported 13B. 20B's have a nice sound to them.
About five years back I picked up a J's Tipo (issue #90) from the Kinokuniya bookstore in the downtown Seattle Uwajimaya. Damn, those places freakin' overprice everything. Anyways.....this magazine was a rotary special issue. I had no choice but to get it! They had this car in it along with several others. I thought this car was the perfect FC. Stripped and pissed off with a peripheral ported 20B sporting some sports injection. I'll tell you what....it don't get no better than that. https://www.nopistons.com/forums/pub...IR#>/bigok.gif Fast forward to last Thursday. I go to help Dragon and Igy tow this car back to the garage. Well, mostly to check out this car he was talking about. https://www.nopistons.com/forums/pub...R#>/tongue.png The second I saw under the hood I knew IMMEDIATELY that this was my dream FC. It's a small world. |
Update... https://www.nopistons.com/forums/pub...1047683473.gif
I welded in some door bars and a cross bar at the bottom of the hoop and welded it to the tranny tunnel... should stiffen things up a little more and give me a nice handle when I need to roll out of the bucket seats. Car went in to the body shop next to our shop today... The car is going to be 4" wider in the rear and 2 1/2" wider in the front. I also have the GT2000 bumper in the mail shortly from RotoryExtreme and threw a Border Racing hood on it. It's getting painted inside and out along with the engine compartment. While it's in for a face lift I'll be redoing the dash and once I get the car back I'll fix the wiring nightmare I found under the dash when I took it all out... The FRP fenders weigh about 1/2 of what the stock ones weighed and the flush mt headlights should weigh considerably less than the bowling ball weight pop up lights. The hood also weighed quite a bit less than the one I took off. All in all I'd guess I dropped about 20-30 lbs off the front end of the car, most of it in front of the tires. Damn I want to drive this thing, but I'm going to wait until I get it all put together before I go out and play... |
You <span style='font-size:21pt;line-height:100%'>WILL</span> take this car to the bullring once it's good to go! https://www.nopistons.com/forums/pub...1047683358.gif
|
Damn that pretty toight!!
|
i still wanna see video of it moving !!! bastards get on it!
|
[quote name='Dragon' date='Apr 28 2005, 09:35 AM']Update... https://www.nopistons.com/forums/pub...1047683473.gif
I welded in some door bars and a cross bar at the bottom of the hoop and welded it to the tranny tunnel... should stiffen things up a little more and give me a nice handle when I need to roll out of the bucket seats. Car went in to the body shop next to our shop today... The car is going to be 4" wider in the rear and 2 1/2" wider in the front. I also have the GT2000 bumper in the mail shortly from RotoryExtreme and threw a Border Racing hood on it. It's getting painted inside and out along with the engine compartment. While it's in for a face lift I'll be redoing the dash and once I get the car back I'll fix the wiring nightmare I found under the dash when I took it all out... The FRP fenders weigh about 1/2 of what the stock ones weighed and the flush mt headlights should weigh considerably less than the bowling ball weight pop up lights. The hood also weighed quite a bit less than the one I took off. All in all I'd guess I dropped about 20-30 lbs off the front end of the car, most of it in front of the tires. Damn I want to drive this thing, but I'm going to wait until I get it all put together before I go out and play... [snapback]705640[/snapback] [/quote] thats pretty good progress for less than a week |
oh yeah... we like pics... lots of them https://www.nopistons.com/forums/pub...IR#>/smile.png
|
Damn dragon you work fast huh.
Siiiick! Can't wait to see it run the 1/4 or lay down a nasty burnout. |
dragon is that TB removable from your old 20b manifold? if so wanna sell it? Its a 95mm mustang unit right?
kevin. |
Also by GT2000 bumper do you mean the RE-Amemiya replica FC2000 bumper?
|
[quote name='teknics' date='Apr 29 2005, 03:36 PM']Also by GT2000 bumper do you mean the RE-Amemiya replica FC2000 bumper?
[snapback]706314[/snapback] [/quote] Yes on the bumper question and currently No on the 95mm tb... I'm still debating aobut exacly what I'm going to sell off the yellow car... |
[quote name='Dragon' date='Apr 29 2005, 05:08 PM']Yes on the bumper question and currently No on the 95mm tb... I'm still debating aobut exacly what I'm going to sell off the yellow car...
[snapback]706341[/snapback] [/quote] What rpm does it idle at? |
[quote name='ccarlisi' date='Apr 29 2005, 05:49 PM']What rpm does it idle at?
[snapback]706349[/snapback] [/quote] around 2,300-2,500 rpm |
[quote name='Dragon' date='Apr 29 2005, 05:08 PM']I'm still debating aobut exacly what I'm going to sell off the yellow car...
[snapback]706341[/snapback] [/quote] Dont know why your debating.. you know im just going to take everything I can.. https://www.nopistons.com/forums/pub...#>/biggrin.png |
Damn ... can't seem to get the video to work , but it sure does sound mean https://www.nopistons.com/forums/pub...DIR#>/wink.png
|
All times are GMT -5. The time now is 04:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands